Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

How to finish wood on the bathroom walls?

Featured Replies

I have a 110 year old home. The T&G in the bathroom is 6.5' tall with 12' ceilings. I have no idea what type of wood it is but I have stripped it and now I have no idea of how to finish it. I have heard/read so many different things I am more confused than when I started out. This bathroom will only have a a claw foot tub (no shower), toilet and sink. The tub will not be heavily used. There is not a fan but there is one window. I foresee rubbed finishes to be a problem because of the design of the wood. Pictures attached. But I have also heard many negatives about polyurethane. I would love some knowledgeable input.

 

 

post-15018-0-77170100-1389499523_thumb.j

post-15018-0-84647500-1389499524_thumb.j

post-15018-0-82562100-1389499525_thumb.j

Welcome to the forum!

There are a lot of finishing guys in here, so hopefully one the more knowledgeable people will chime in.

What negatives have you heard about poly? As long as you buy quality poly, you should have a good product. If I were you I would call general finishes customer support, and ask them for a suitable product.

Are you brushing the finish on?

  • Author

I was told that poly in the bathroom was a problem because it can not be repaired or touched up, should the need arise, without completely restriping and refinishing. To be honest after doing that once, I prefer never to do it again. Also I am not sure how I would buff between coats on the carved profile of every other piece.

Tung Oil was the other option I was considering but it being a rubbed on finish I am back to the same problem. I am not sure how I would get into the grooves.

 

I have bought both the poly and the tung oil, just need some help ndeciding which to use.

 

I would really love some input.

  • Author

One other thing, there are several holes in the wall. I am not staining it because I like the way it looks now. I have wiped it down twice with denatured alcohol since the photos. Do you have a recommendation how to deal with the holes so that they are less conspicuous?

I'd give it a high grit sanding then you could use the sawdust to make a filler for the holes.

You could use an oil based varnish to protect it from the humidity and give it protection.

 

One other thing, there are several holes in the wall. I am not staining it because I like the way it looks now. I have wiped it down twice with denatured alcohol since the photos. Do you have a recommendation how to deal with the holes so that they are less conspicuous?

If the holes are small, then I would fill them with wax sticks after you apply finish. Simply rub the wax in, and buff it off.

I was told that poly in the bathroom was a problem because it can not be repaired or touched up, should the need arise, without completely restriping and refinishing. To be honest after doing that once, I prefer never to do it again. Also I am not sure how I would buff between coats on the carved profile of every other piece.

Tung Oil was the other option I was considering but it being a rubbed on finish I am back to the same problem. I am not sure how I would get into the grooves.

 

I have bought both the poly and the tung oil, just need some help ndeciding which to use.

 

I would really love some input.

I am not championing poly, but there is a great wipe on formula for poly that would be ideal for odd shaped pieces.

The water based clear finishes work fine as well and touch up easily too. Wax sticks or Color Putty after finishing fills small holes. Sometimes sawdust and finish make many holes less noticeable.

Varnishes will add an amber tone and darken the wood, sometimes this is desired, sometimes not. Water based finishes tend to add little color and dry much clearer.

Minwax and General Finishes make water based ( also called water borne) clear finishes.

You can sand or buff between coats with a Scotch Brite pad, a maroon or grey one works for me.

After you finish stripping it down, see if you really care about the holes; I think it adds to the look, unless there are some huge ones there. If so, use a good wax stick after the finish is on. Easy to match and you could use two for a hole to make it blend better.  If the hole is big enough to bug you, I think the sawdust trick will just fill the hole with a obvious circle; it works great, though, for hairline issues.

 

It looks like a soft-grain wood; applying a finish on it can blotch a lot so you might want to try your finish somewhere inconspicuous to see if it will be a problem; the old finish may have soaked in enough on first application to seal it, but it would be worth trying first.

If the wainscoting is sanded the color should lighten considerably, since you're removing age and any previously applied finish.

Wouldn't a clear oil varnish get you closer to the present color...over time?  If he doesn't want to apply a stain?     

 

As for the holes it might be worth trying a few methods.  I've never had luck with wax sticks as I could never get a good color match, especially in a noticeable area.  You can add color to sawdust but as Paul mentioned, if the holes are large it will be noticeable.  Either way you could use black to resemble small, aged knots. 

 

I would appreciate any additional input, I'm here to learn.  

My very first thought when I read the OP was using dutchman patches.  But I think that might be too much character for anyone.   :lol:    

It sounds like you're not terribly concerned about the humidity, but I would consider a spar varnish.  I've used it in outdoor and humid conditions with good results.  Varathane makes a nice water based spar varnish.  A few benefits to water based are: less stinky, toxic solvent smell than oil base.  It won't impart as much color to the wood as an oil base, so it won't mask that nice aged patina you've got there.  It dries really quickly, so you can get 2-3 coats in an afternoon.  It may raise the grain, and you can have some issues with using it on pitch-heavy woods (but you'll get that with many other finishes as well).

 

To venture a guess as to species, first impression was something like douglas fir.

 

And one last thing: don't over analyze or drive yourself nuts trying to figure out the optimal, absolute best and only way to go.  There is no such thing.  I would bet money that the guys building that house 110 years ago just slapped on whatever finish they had handy and called it a day, if they bothered with it at all.  And it's lasted this long!  So don't pull your hair out over it.

  • Author

Sorry not sure what I did to put the quotes where I did.

 

Thanks for the input, I appreciate it. We would like to keep the current color especially after we wiped it down with denatured alcohol. The clear oil varnish sounds like the best bet as long as it can be put on with a brush. Although I think I would prefer a rubbed finish, I am concerned with the cracks and crevices.

 

I do have a question about Paul-Marcel's post, what kind of blotchiness are you talking about and are you saying this might be a possibility with any finish?

Soft-grain wood can be blotchy when you apply a finish, even a clear finish. As you saw when you wiped down with DNA, the wood takes on a different color when 'finished'.  If this wood is blotchy, some parts will absorb more finish than others and result in blotchy color.  All depends on this wood.  It's pretty old so might be just fine.  Wipe it down with mineral spirits just like you plan on applying the clear coat and see what you get.  The mineral spirits will flash off relatively slowly and give you a pretty good look at what it will look like with the clear varnish or oil on it (minus any amber tone that would add).  Better to try it out and complain you lost an hour trying it out to verify than to clear coat it and come up with blotch.  If it looks blotchy, come back and we'll see how to work around it (many ways).

For the large holes you may want to drill them out or chisel a square hole and drive a wood dowel or hunk of wood flat grain side up (try to find the same species of wood???) in the hole with a little glue and be careful. Somehow texture the end of the repair to match the roughness of the boards (hard to see from pic) and color the repair area with some of the stripper slurry containing the old finish or get some touch up markers to color the repair.  

 

I would coat the wood with a good satin oil such as general finishes Arm- R-Seal satin.

 

-Ace-

  • Author

New problem :(  My heater went out, it took 6 days to get the part in, brand new 5 ton unit I might add.

 

 I did not think about the poly and tung oil I bought being in the house. The lows were 6 degrees and highs 24ish for 4 of the 6 days the heat was out.

 

Are they ruined, what  are the odds I can still use them?

Not sure about the Poly, but the oil is probably fine.  I have can of BLO that I keep in my garage and is several years old.  Still goes on fine.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.