Recommended Posts

Posted

So i sharpened my first saw today, I have a 26" Disston with 8ppi.  I used a 6" slim taper nicholson file and a rake angle guide.  after i filed it rip, it was obviously sharper than before and i could actually make a cut with it.  The problem is that it does not snag on my palm as i've read it should, and the flats seemed to be only at the points of the teeth, not all the way to the bottom of the gullets.  is this a sign that i just need to keep going or a technique issue?  also the saw looked to have a pattern of 1 deep gullet with 2 shallow gullets over and over.  is there a reason for this or should i just seek to file them all the same?  I find it funny going from research to action.  I've read and read about saw filing and felt i had it all figured out until I actually did it once :)  thanks in advance for any help, this site has been a great help in my transition to hand tools.

Posted

Post a picture, if you can.  Everybody messes up to start with.  I don't know of a single person who ever did it absolutely correctly to start with.  Once you have it though, you have it.

  • Like 1
Posted

Hey Puddlin how are you trying? The files come through as empty files with a ZIP file association. Under more reply options in the lower right of the dialogue entry box you can attach JPG and others but I have not seen ZIP come through.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.