Recommended Posts

Posted

...or which of these would be most useful IYO :)

 

I have about $140 saved up that I can spend on tool(s). Here's what I'm thinking...

1) A modeler's rasp with fine grain (have a larger cabinet makers with coarse grain)
2) finishing out my bench chisels (need 1/8" and 5/8" and have had need of those sizes on occasion)
3) hot glue pot and hot glue (been really wanting to try/use this - so far have like liquid hide glue)
4) just save it for something later on.

TIA,
Tony

Posted

It really comes down to what you think you need and what your long term goals are in your shop.

 

What will you get the most use out of?  Is there something you want long term that you should save for?

 

In the end, these are decisions that only you can make.

Posted

That's the problem, in working through the three projects I've got on the bench right now I've found times when all have been beneficial.  I got by with slightly smaller chisels so it's not an immediate need.  The modeler's rasp would have helped me a lot on adjusting a hole that was slightly off that the larger wasn't fitting it (ended up spending about three times as long or longer using just the tip of that rasp).  The glue is a 'want to experiment' thing and I know I could kludge together a solution other than an electric glue pot for cheaper.  The coping saw - I got my son one for Christmas so I could borrow his I reckon.

 

So by my thinking, the rasp would be the most immediate bonus to my projects.

 

I'm doing pretty good on tools now with more than enough planes and (aside from a coping/fret) a good solution for sawing needs.  

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.