Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

First time staining, best way to match the colors in this render?

Featured Replies

I just got done building my first desk and now I would like to accomplish the finish in my render. I believe I will need ebony for the top, but I'm not sure how to get this deep maroon semi-gloss finish so that it looks like the image. I would like it to be as close as possible. This desk is made of Red Oak and Radiata pine for the frame. (I might replace the pine 1x2's with oak if the slight difference in the finish doesn't have the aesthetics I want.)

 

What would you do to achieve the finish in the render? How would you clear coat/finish the desktop to protect it from writing, water, food, etc?

post-15241-0-84669000-1393271741_thumb.j

post-15241-0-24897100-1393271751_thumb.j

post-15241-0-89057900-1393271758_thumb.j

A mahogany stain and black india ink for the top. I like working with shellac because it dries quickly, but I would use a poly on the top for extra durability. That's my opinion, but there are some pro finishers lurking around here somewhere, that probably have better advice.

He who dies with the most tools ... leaves a great estate sale.

The problem is the method. Most of the time your going to see the method change from hobby vs pro so it very hard to give advice to a first time finisher. I would just spray it and be done with it. A spray lacquer stain is going to give you what your looking for and a catalyzed lacquer is going to give you a good finish. I think your going to find it next to impossible to get what your looking for with off the shelf finishes at home depot.

  • Author

I was thinking red aniline dye with a red mahogany finish to darken it a bit. I've seen a few pictures on Google where the piece was finished this way and it looked really good. 

Apply a black dye and sand most of it. Then apply a red stain. The black will stay in the grain and darken the red a bit. The only problem is now sanding through the veneer.

  • 2 weeks later...

Save all your cut offs.  You'll need to do lots of experimenting before you apply anything to your finished product.  Never "try" something on the finished product, ever.

 

Each final choice test piece must be prepared to the same degree as the final, from sanding through top coat.  That's the only way you can know what the "finish" will look like.  "Fixing" staining problems is challenging at best, sometimes ends with painting.  After all that work.

 

I go through figure, color, topcoat test cycles all the way to the last coat.  It's amazing how a few choices leads to the finished product.  And let's face it, it's the finish that gets all the attention.

 

Don't practice with live ammunition!

Would you consider paint?

Based on the materials you've used (home center pine and ply) I think it's a bridge too far to expect that stain is going to get you the massive color shift you've proposed. Especially the black top! A good paint job, OTOH, will get the job done. The black top will be great and the sky's the limit for the mottled reddish sides. You can go for realistic faux graining, faux marbling, etc. or whatever you fancy.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.