woodmang Posted February 25, 2014 Report Posted February 25, 2014 I inherited a Craftsman 103.21821 4 3/8" 1/2 HP Belt Driven Jointer. Best I can find out it's from the late 50's. There is a guy locally that has offered to buy it, but I have no idea what it is worth. I can't seem to find any information online about value. Can anyone here venture a guess? Still runs, but obviously needs to be tuned up / restored. Quote
wdwerker Posted February 25, 2014 Report Posted February 25, 2014 It is probably worth about $100 max. It is going to take a lot of time to clean it up get the blades sharp and adjusted (that can take hours to get right). So it is more of a project than anything. I could be wrong but unless you are wanting to put a lot of time into it yourself it is worth whatever someone is willing to pay. Parts are probably impossible to get except the standard knives, belts, pulleys and such. It is a pretty nice old jointer. I have never seen the single column type base before. Quote
Rick A McQuay Posted February 25, 2014 Report Posted February 25, 2014 There are folks who collect old Craftsman machines but they aren't particularly rare or sought after. I've seen these locally for $30-100 depending on condition but that will vary by region. I've never seen that base either and sometimes a base can be more valuable than the machine, might want to look into that. From what I remember Craftsman only used that gold paint on certain years. My craftsman lathe has that color and I believe it to be a 1958. Quote
dwacker Posted February 25, 2014 Report Posted February 25, 2014 One mans trash is another mans treasure. I think its pretty neat but not worth anything to me but I do think cleaned up and used as a display item its cool. Quote
minorhero Posted February 27, 2014 Report Posted February 27, 2014 I would say the jointer is worth about 100 to 200 depending on its running condition and what they might be going on in your area. The stand it is on is a relatively rare craftsman pedestal stand. The stand is worth 100 to 150 by itself. Shame the jointer is missing the belt guard. A lot of machines of that era did not have belt guards because they were sold as accessories. You can make an account on owwm.org and sell it in the bring out the dead area. If you advertise it for 250 you will get takers pretty quickly. Good luck. 1 Quote
woodmang Posted February 27, 2014 Author Report Posted February 27, 2014 Thank you all for your responses! Sounds like the general concensus is that the stand it's on is quite rare...I asked the guy that was interested for $125 and he hasn't responded for a couple of days so for now I will leave it sitting where it's sitting! Thanks for all the insight, I would have had no idea what it was worth or that the stand was so rare. Quote
woodmang Posted February 27, 2014 Author Report Posted February 27, 2014 I would say the jointer is worth about 100 to 200 depending on its running condition and what they might be going on in your area. The stand it is on is a relatively rare craftsman pedestal stand. The stand is worth 100 to 150 by itself. Shame the jointer is missing the belt guard. A lot of machines of that era did not have belt guards because they were sold as accessories. You can make an account on owwm.org and sell it in the bring out the dead area. If you advertise it for 250 you will get takers pretty quickly. Good luck. I will check out that site! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.