rodger. Posted March 1, 2014 Report Posted March 1, 2014 When you decide to use a bushing and bit in your router, is there a rule of thumb that you use for offset? For example, if I want to use a 1/2" bit, does a 5/8" bushing have enough clearance, or should I move up to a 3/4" bushing? Quote
Dave H Posted March 1, 2014 Report Posted March 1, 2014 I'd go with the 3/4 if I had a choice. Did your router come with a centering pin and centering cone I have this feature on my porter cable 890 it assures the bit rides in the center of the bushing. Quote
wdwerker Posted March 1, 2014 Report Posted March 1, 2014 I choose based on the offset amount. It might be you need the minimum offset to prevent clearance problems. It might be a perfect 1/8" offset is easier to calculate the final part size. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.