Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

HELP! I can't screw this one up!

Featured Replies

I purchased a table that looked innocent at first, but after bringing it home, I have realized just how intricate the wood is and how difficult the staining of this table may be.  The center is a kind of gunstock color that fades past the inlay into a Cherry or Red Chesnut.  I've included pictures but they don't accurately reflect the exact color.  The camera distorted them just a bit.  Is this a situation where the same stain will affect what I think may be different woods causing the fade, or is this a technique that I will need to do to achieve the same result?  ANY help would be so greatly appreciated!!!

post-15307-0-84379400-1394131518_thumb.j

post-15307-0-13995200-1394131535_thumb.j

post-15307-0-45871700-1394131552_thumb.j

post-15307-0-08571100-1394131563_thumb.j

post-15307-0-84579900-1394131573_thumb.j

post-15307-0-64414900-1394131586_thumb.j

post-15307-0-68605700-1394131607_thumb.j

post-15307-0-56112300-1394131618_thumb.j

post-15307-0-84234000-1394131639_thumb.j

Not sure what your asking for here?

 

To my eye it appears you have a very old shellac finish, possibly an old lacquer finish that has just aged. I don't see any stain going on. 

 

Are you going to refinish your table?

 

-Ace-

  • Author

Yes, I was planning on stripping with a citrus based stripping agent and then I thought because it has such a red tone to it that it required staining?  Do you suggest getting down to the original wood and just putting on a finish?

Looks toned around the outer edge to me in the photo. If it were mine Id take it to a finish supplier and have them match the toned finish or finishes after sanding the underside down to bare wood in a sample square. The table is going to be fairly bland without the toning and just a clear finish.

The question is, do  you like what you see? If so, that is going to require some skills with a sprayed dye and a sprayed finish. If you want to remove the finish and put a clear over top? Were just not sure what the wood is going to look like.

 

As said above, turn the table over and test with some stripper. I see a job not for the novice finisher.

 

-Ace- 

If you have never done toning Id suggest a hobby shop air brush as they are easy to control. Its easy to teach yourself how to build color and how to get it on even. I think most make to big of deal out of. Get some scraps plywood is cheap and easy and just practice. Even poplar works well and is a better test before moving to your table. It has much to do with the products used. Some are a real pain but others make it simple.

 

Below is an example of poplar with a fine coat used as blotch control but if the same was done over and over again you can see that it would slowly build color and is easily controlled. Just practice its not that hard.

 

Don't want to jump to any conclusions, not so sure that is darker toned finish around the edges of the table. That could be age or caused from contact with oils of our skin and cleaners. Just saying, it doesn't look consistent and the pictures aren't very clear.

 

-Ace- 

You might search for info on finishing guitars. That edge color looks very similar to the 'sunburst' applied to many electric guitars. As PB said, an airbrush is the way to go for that.

 

Yes it not all that hard to get the hang of. Once you learn to get the thinnest of coats you have won the battle.

Both of these are the exact same stain out of the same bucket and same gun. As you can see you can take the color range from next to nothing to full darkness. No thinning no rocket science just practice.

 

post-5350-0-67812500-1394137407.jpg

 

facade2-e1393868288792.jpg

  • Author

Thanks for everyone's help!!  I really appreciate it!  I'm going in on a wing and a prayer.  I'll post pics of the final result! 

 

Thanks again!  You are all very gracious people!  :)

All this is just a GUESS but guys I don't think this is stained at all !!!!.... Like ace I think it's an aged finish but it looks like a mellowed Polly to me

I think the shading on the top is from the heart and sapwood in the strips of veneer that are bookmatched to create the quadrants for the burst effect.

And the darker edge could just be a darker sub-straight with the same aged finish...and with all them curves there is more endgrain exposed and that would also produce a darker color with the same finish.

If you like the color I'd just give the surface a very light sanding to blend in any scratches and break the surface a bit... Then use an oil/wax mix, or a polishing wax, flood the surface let it sit and dry a bit then remove the excess and buff.

If you remove that finish you might not like the color variations in the different species of wood

I think it depends on your monitor. On my iPad it looks like old shellac or poly. On my MacBook it could co either way. On my Mac desk top I'd say 100% tinted.

Should she be worried about a stripper breaking down the glue and causing the marquetry to lift? (assuming that is marquetry and not painted under the finish).

I think it depends on your monitor. On my iPad it looks like old shellac or poly. On my MacBook it could co either way. On my Mac desk top I'd say 100% tinted.

Yeah good point ... I'm on the iPad

I looks like it was toned on my Retina display iPad . She might want to read up on stripping veneered tops. I would find some cheap beat up flea market piece and practice on that first. Best lesson I ever learned was to do test pieces before I ruined a lot of expensive or irreplaceable materials.

Using a good chemical stripper. Your dissolving only the old finish. It will take several application to get down to the raw wood. You could do one or two applications. Then finish off with a card scraper the inlay portion.

 

Ok, in my opinion this is not a job for a novice. As the title of this thread speaks...I can't screw this one up! The problem is going to be the inlay and the grain changes.

 

Do yourself a favor and have someone who has experience take a look at this. You may be able, if this is shellac, to just freshen the surface and apply more shellac.

 

-Ace- 

Agreeing with Ace.  The piece is stunning, too much pressure for a first project in my opinion.  The fact that you looked here suggests you do not have a local friend with expertise? The piece looks worth an investment.  Have a pro look at the table and shoot you a quote then post here about what options you are given and these guys have a depth of knowledge that will be invaluable.

 

FWIW my vote is also that the piece is tinted.  The detail on the inlay is too muddy in my opinion to assume anything else in my experience. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.