David Monette Posted March 24, 2014 Report Posted March 24, 2014 Got a jointer and planer this past weekend. The jointer is a Powermatic Model 50, Serial # 250256. From what I can tell it was made in 1972. My Dad bought it new. It has been in the family business since that time. Now it is for my use (until it is needed elsewhere). My other acquisition is a Rockwell 13" - 5" planer, Model 22-101. The serial number dates this to 1956. Have not got that up to my shop yet - need to get a trailer as this bad boy weighs in at a staggering 600 lbs. Two awesome pieces of equipment! Now - 2 questions; are helical cutting heads available for either of these? Would it be beneficial to upgrade the cutter heads if the newer style is available? Quote
sjeff70 Posted March 24, 2014 Report Posted March 24, 2014 I was just browsing Byrd heads yesterday for different machines. I'd have one for that PM50. The heads are around $350 for both the 3/4 and 5/8 shaft depending on where you go. The heads for planers are expensive and for that machine ($900-$1000) there's probably not much value there. Quote
Byrdie Posted March 25, 2014 Report Posted March 25, 2014 For some reason i always laugh when I read someone talking about Byrd heads. Not sure why. Quote
David Monette Posted March 25, 2014 Author Report Posted March 25, 2014 Well...I checked with a couple of companies for helix heads. Byrd and HelixHead dot com also offers them, but I had to write to get the quote as they custom make the head for your machine - you can't just buy an off the shelf assembly - at least that is the way I understand it. There is a YouTube video that explains it quite well. I asked about the planer, but yes, might be cost prohibitive. But I want to know anyway. I am also going to call Powermatic - for what that might be worth. Say, Marc...didn't you just purchase a helix head for your Powermatic? I also need a new on-off switch for the PM 50. Nothing shown in the manual. Anybody have a good source for that part? Is it a good idea to install a magnetic starter switch - should the power go off and then come back on again, the machine would not start automatically. Thoughts? Quote
sjeff70 Posted March 25, 2014 Report Posted March 25, 2014 Dave, different manufacturers make those heads that's why I just call them Byrd (tee-hee), they seem to be a standard. Supposedly once installed the typical hobbyist will never need to sharpen it. I guess turning the cutters 3X is enough. It looks like there's an abundant stock of the popular ones available. Can't imagine why else this would be. Quote
mikem Posted March 25, 2014 Report Posted March 25, 2014 I have straight knives on both my planer and jointer. I have thought about upgrading them, and if I had to do one first, it would be the planer. Having them on the jointer but not the plaber seems to defeat the purpose of having them. Quote
sjeff70 Posted March 25, 2014 Report Posted March 25, 2014 Reasons vary I suppose, mine being more maintenance minded. If I never have to screw with a cutterhead once it's in the machine that's a huge time and money saver over the life of a machine. Some people take a lot of pride in maintenance, unfortunately I'm not one of them....I'm very lazy. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.