rubus Posted April 2, 2014 Report Posted April 2, 2014 Hey folks, I just purchased a general floor model spindle sander and had to transport the unit on its side only to realize the oil spilled everywhere. Argh... I assume everything should be ok once i replenish the oil but the manual does not state how much and what kind of oil is best. Anybody in the know? Thanks Quote
Jfitz Posted April 2, 2014 Report Posted April 2, 2014 I don't know about the 'how much' but any 80W or 90W gear oil should work. Have you contacted General customer service? Quote
minorhero Posted April 2, 2014 Report Posted April 2, 2014 I second calling general customer service. Some of these sanders will have bronze gears which can be damaged by certain motor oils. Quote
CT Proctor Posted April 2, 2014 Report Posted April 2, 2014 I would call General too but our Jet uses SAE 90 gear lube. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.