Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

G and G 'Waterfall' tapered legs

Featured Replies

Making a small outdoor bench out of Spanish cedar. I wanted to try my hand at a few Greene and Greene inspired bits, so I sketched in the double slots (Gamble house table) on the apron, which I have down from the guild build, but also added the waterfall style tapered legs.

ROUGH sketch attached.

I tried a leg tonight. It's 1/8" of relief every inch for a total of 5/8" taper. I used the dado stack, and rounded over with a rasp.

Is 5 steps too many? I think it might get lost from a distance and just look like a bevel. Perhaps 3 deeper cuts, every 2 inches for the same total 5/8" taper might look better?

The face of the waterfall itself will be facing the insides of the bench, so the 'ripples' aren't smacking you in the face, but I'm not sure how I feel about it yet.

Photos attached, even one by a chair for some context. Note, the garden bench will have an apron, covering up the top portion of the legs.

Thanks. Would love some constructive (or destructive) criticism and/or ideas.

VJ

post-15261-0-89021300-1399527760_thumb.j

post-15261-0-94868700-1399527774_thumb.j

post-15261-0-16147700-1399527803_thumb.j

post-15261-0-42471000-1399527820_thumb.j

post-15261-0-95198300-1399527857_thumb.j

I agree with Beechwood. Two or at most three will look interesting, perhaps not equidistant, but reducing in distance toward the bottom. Another Greene and Greene detail that I find interesting (and subtle) is the incision made in the bottom of the leg. It might still work on your wider outdoor bench.

 

John

Definitely too many.  G&G details are all about subtlety...although anyone who doesn't like G&G will argue there's nothing subtle about it.  Try three, I might even go with two...any more and it's just hitting you over the head.  And, like John, I prefer the leg indent detail.  Far more elegant, IMO.

 

The waterfall screams Art Deco to me, which is a style I like but is tough to pull off without making something look gaudy...but feels incongruent to G&G to me.  But whaddo I know?  If the Greene Bros say it works, then I guess it works.  In the right place with proper execution.  I find that most people who try to improvise G&G details in a piece tend to overdo it.

  • Author

Thought so. It's off. 5 was too many.

I have the jig for the indent, but wanted to try something different. I should have used a scrap cut instead of my actual leg

Thinking 1/4" is too deep of relief for me to salvage into three 'steps'. We'll see.

  • Author

Showed my wife, who just loves the look...so I guess that's that. Not G and G, but hey...if she likes it....

Since the Art Deco looking steps will all face inward under the bench, it may be more subtle with the sum of the parts.

I'll post a pic when complete. Thanks all

  • Author

Well...scrapped the waterfall altogether, and just cut in a simple cloud lift. Much better.

I cut the gamble house table style apron tonight, and mock propped it up for a visual.

The design was to be for my little guy, but still strong and wide enough to support an adult. The smaller dimensions, though, really make it a weird looking bench...almost reminds me of a school desk.

Besides just a few square plugs and an all around roundover, that's it for g and g details. Even the back apron will likely just be a subtle rectangle.

post-15261-0-09494900-1399701754_thumb.j

post-15261-0-54824400-1399701763_thumb.j

post-15261-0-47678600-1399701775_thumb.j

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.