Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Why a belt sander w/a disc sander vs. manual sanding or palm sander?

Featured Replies

Newbie question and thoughts here. 

Is the electric belt / disc sander made just  for aggressive sanding?

Do hobbyist use this instead of sanding by hand or using a palm sander? 

Or is just a sanding preference in general?

 

Thx for any feedback. 

They each have their strengths.

The disc is fantastic for bowl edges and useful for many other things.

ROS is fantastic for swirling grain and intersections and useful for many other things.

The belt is fantastic for straight grain and useful for many other things.

Aggressive vs non is all about grit, pressure, and technique.

Part of it is about being able to sand while maintaining the flatness and crisp edges of the piece.  Part of it is that most people don't like sanding and any machine that can shave off even seconds of sanding I'll buy two of.

Hand held belt sanders are for knocking out large unevenness fast. Maybe a glued up panel varies a little or even a 1/16th from board to board, a 80gr belt will knock it down fast. Too fast in the case of idiots. Follow up with 120 belt to knock down the 80 scratches, this is where I bring in a r/o sander. Start at 120 then 150 and your done. I don't sand wood with finer grit, I sand the finish between coats.

Gotta focus on keeping the belt sander flat and moving at all times. I had a friend take a 1 3/4 door down to 1 1/2 in places with a belt sander.

Steve

I use my disk sander for sanding to the line on bandsawn parts, works great for that last little bit. The belt is good for flattening out small angles, or longer pieces. I usually do hand sanding on the final sanding before finishing.

  • 3 weeks later...

I must be strange, I have 2 belt sanders 4 ROS and a disc/belt sander.... But for some reason, unless it's a large piece, I prefer hand sanding!  It's a sensory thing!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.