Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Resin and wood table top

Featured Replies

I've never used Resin and I thought it may be the best option. I have a 2 inch thick piece of an oak tree with a great 5-6 inch open knot hole in the middle. It also has some nice character on the edges. I thought a clear resin may allow for a nice table top and display this beautiful wood. Is this a good option? Is another way better? What is the best way to get started? Thank you for the help.

http://www.pinterest.com/pin/23151385558126185/

 

this is an awful picture but it should give you a idea.  Perhaps you could do something similar to this.  you can add all kinds of material to the epoxy to color it.  i use oil paint and some pearl additive to give the material a sparkle.  why just fill it and hope to cover it up make it stand out. 

I saw a table once that had a natural hole about 3" diameter in the middle. They had put a colored resin base followed by a clear resin layer. On top of this they had put a vintage penny then topped the whole thing with more resin. Apparently doing that part took longer than building the rest of the table.

I did a set of tables quite some time ago that had some holes that I filled with epoxy.  On one of them, I also shaped another piece of wood and "floated" it in the middle.  This pic may not be the best but, you can see what I'm talking about..

 

http://imageshack.com/a/img854/458/30l0.jpg

  • Author

Thank you all for the posts. I'm going to use what you said and go for it. I'll post a pic of the finished product. Thanks again.

There are higher quality videos but this is the quick and dirty. Set times in the five minutes range. Dye-able for black or tint applications covered by clear (to embed a penny.) Polyurethane composition for good wear resistance.

I use West Systems..  I also use a hand held torch for the bubbles as they come up.  Just a quick brush across the top with the torch pops the bubbles and keeps the epoxy clear.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.