chefmagnus@grics.net Posted November 6, 2014 Report Posted November 6, 2014 I have just a plywood top on the side of my Unisaw. I have a piece of granite that I got when the local mall closed and with it the fudge shop. I am planning on building a full set of drawers to go into the area under the top. I have a 1/2" gap to fill front and back I was thinking of using some yellowheart as banding around the granite that is a deep burgundy in color. It is 2-1/2" thick by 72" long and will require me getting some helpers to get it out of the basement. It is stable and flat. I just checked it with a straight edge. It is also not doing anything in my basement right now and has been there since 2008. Would you use it or just go with traditional materials for this area? I was thinking that the added weight would add to the stability of the saw. Would you extend the guide rails to 72"? My saw has a mount for a router in the right wing. What kind of router is best to mount in this hole? There had been a Hitachi router there but wanted to check before I put it back. My daughter says that the slab still smells like fudge. Here is a pix of granite like the slab. http://www.qstoneworks.co.uk/image_library/260_medium_Imerial%20Red%20granite%20sample.jpeg Quote
weithman5 Posted November 6, 2014 Report Posted November 6, 2014 If you have and don't have to move it around, why not? FYI note chef said the picture is "like" the slab not a picture of the slab. just so we don't go off track Quote
dwacker Posted November 6, 2014 Report Posted November 6, 2014 Personally I would break it wouldn't last long. Im a big fan of formica. I would have a brain fart and hit something with a hammer without thinking. I hate cabinets pretty much anything on the floor that isn't a machine. Quote
Tom Cancelleri Posted November 6, 2014 Report Posted November 6, 2014 I don't see why you shouldn't use it. I don't understand how it will add stability to the saw as it isn't bolted to the saw correct? It will essentially be butted up against the table with a cabinet like structure beneath it. Also keep in mind that if you drop anything on it or place tools on it you run the risk of chipping the granite. I'd love to see it finished though Quote
chefmagnus@grics.net Posted November 6, 2014 Author Report Posted November 6, 2014 I have had granite countertops in my kitchen most of my life. I have never chipped or crack a one. And at 2-1/2" it is tougher than a counter top. Now I have probably jinxed myself. I also have a sheet of 3.2mm SS that would be a night table top but I would have to have it trimmed to fit. Luckily I limit my hoarding to the store room off the basement kitchen. Quote
chefmagnus@grics.net Posted November 6, 2014 Author Report Posted November 6, 2014 The saw is not going on a mobile base and will be in the center of the shop. Quote
weithman5 Posted November 6, 2014 Report Posted November 6, 2014 i saw a table saw (no its not a lymeric) at sears that the main top was granite. i would not spend the money on it but it was purtiful Quote
Tom Cancelleri Posted November 6, 2014 Report Posted November 6, 2014 Steel City makes a granite top table saw, bandsaw, planer and I'm sure a few other things with granite Quote
Vyrolan Posted November 6, 2014 Report Posted November 6, 2014 Steel City makes a granite top table saw, bandsaw, planed and I'm sure a few other things with granite Matt Vanderlist had a few of those...I know he had the tablesaw before SawStop started sponsoring and gave him one of theirs. IIRC, he was rather fond of the granite top and the tools in general. Quote
wdwerker Posted November 7, 2014 Report Posted November 7, 2014 It would be a great flat reference surface to assemble on. I wonder how glue drips would clean up? Quote
chefmagnus@grics.net Posted November 7, 2014 Author Report Posted November 7, 2014 Not to be reported to SWMBO, glue peels right off granite counter tops. And I will never admit to doing assembly in the kitchen cause the shop was too cold last January while she was in CA with her uncle. 2 Quote
wdwerker Posted November 7, 2014 Report Posted November 7, 2014 A little sawdust in your late night snack never hurt anyone. Bit more fiber in your diet ! What she don't know won't hurt you..... Quote
minorhero Posted November 7, 2014 Report Posted November 7, 2014 The only disadvantage I see us how massive that side table will be. 72" of granite plus the width of the saw is HUGE. Make sure any base you use has adjustable legs as keeping everything in the same plane will be annoying without those. If you have the space, and the muscle to o move it than go right ahead, no reason not to. Quote
chefmagnus@grics.net Posted November 8, 2014 Author Report Posted November 8, 2014 We are taking about having a hog roast for the shop. We will have 30-40 guys and families to help finish setting things up. Everyone works then we party until the cops are called. I almost enjoy everyone having a good time and getting happy on adult fluids than when I was enjoying drinking myself. And I get the bonus of the wife not being able to torture me when I have a hangover. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.