Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Toyboxes to be made in Santa's workshop.

Featured Replies

Started the 'carry toy boxes' this evening for Christmas presents for friends' kids. I made a similar one for my son in March.

Milled all the lumber (pine) this evening, planed, ripped and cut.

First time batching out 4 of something at once. I started with dimensions and my plan, and then immediately started to make changes to get the most out of the lumber I had on hand. Then of course, if there's a slight defect on the end of a piece that needed to be trimmed off, they all had to be cut to similar width so cuts can be consistent through the project.

Good kids get the quartersawn boxes.

fb38e450cedf7859f29d6058d442d685.jpg

73f536f5acb72bd2aba26c2ff2a0e0b6.jpg

I keep pine offcuts for picture frames for the shop...for my 'priceless' art.

b1ae62ea37dad09d7982fbe76638140a.jpg

...like this one.

4da608301635655bb1a1ce65cad29807.jpg

  • Replies 118
  • Views 18.5k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • Nah, you'll be fine.  Pine is like milling butter.  You may get a little tearout at the bottom where you'll be routing uphill.  Practice on a test board!   And clean up that pattern before you rout

  • wouldwurker
    wouldwurker

    I'll use water based finish when they pry the VOC's from my cold dead hands!

  • Started the 'carry toy boxes' this evening for Christmas presents for friends' kids. I made a similar one for my son in March. Milled all the lumber (pine) this evening, planed, ripped and cut.

Posted Images

Awesome!  

 

Your art may outclass your frame a bit tho  ;)

  • Author

Took the time to make a template. Am I pressing my luck using a flush trim bit on the inside hole?1240f19ff2b9d98a32688adf9d6dc551.jpg

Nope!  Obviously, rough cut the shape first and pay attention to your travel direction with the router.  Use a flush trim bit with a smaller radius that your corners.

 

Also, I see a few humps in the handle of your template.  If you want those in the final piece then, that's what your going to get.  If you don't want them there, spend a little more time on that portion of your template.  Your final piece will only be as good as your template.

 

Good luck!

Nah, you'll be fine.  Pine is like milling butter.  You may get a little tearout at the bottom where you'll be routing uphill.  Practice on a test board!

 

And clean up that pattern before you rout so you only have to do it once.  :)

 

Edit...Kev beat me to it.  The man is quick on the draw.

 

 

LOL at the priceless art.  Today my daughter brought home a school drawring that said, "I'm thankful for my cats," with a picture of a kitty.  We don't have any cats.

Nah, you'll be fine.  Pine is like milling butter.  You may get a little tearout at the bottom where you'll be routing uphill.  Practice on a test board!

 

And clean up that pattern before you rout so you only have to do it once.  :)

 

Edit...Kev beat me to it.  The man is quick on the draw.

 

 

LOL at the priceless art.  Today my daughter brought home a school drawring that said, "I'm thankful for my cats", with a picture of a kitty.  We don't have any cats.

 

Maybe she's trying to tell you something... ;)

  • Author

Good eyes, gentlemen. I figured out that 'humps' issue the second I traced my pencil around it. :)

Could just be the picture but, there still looks to be a couple bumps on the bottom (of the pic) side

Vinn, Don't you ever rest?

You've always got a project going!

I'm envious!

Good on ya!

  • Author

Could just be the picture but, there still looks to be a couple bumps on the bottom (of the pic) side

You guys won't let me phone this one in, will you! :).

Bumps fixed

Vinny is the high-strung type.  You can tell by the way he moves in his videos.  I wish I had that kind of energy after a day of work.  I'm like a pile of mashed potatoes by five o'clock.

Sorry, not picking at your template VJ but, you did ask  ;)

  • Author

Rough cut to close to the line on the bandsaw and waste hogged out of the handle hole. Live to route another day. 4d057d400584b1e990930dc8f294a634.jpg

  • Author

Routing out the ends with the template.

Pucker factor on the handle holes - 10000.

Not sure if I can take 7 more446b76169e46bf4e86319609d4fbcb23.jpg

Routing out the ends with the template.

Pucker factor on the handle holes - 10000.

Not sure if I can take 7 more

 

You'll do fine..  I'm quite sure you were nervous the first time you tried any new technique!  

 

Looks good tho!  No bumps in the handle or nothing  ;)

  • Author

Mock up dry fit. I'm ok with the end grain. Once the mitre keys go in, the eyes get drawn to them.

The proud edge tops of the sloped ends will get planed or sanded flush after assembly

54695ebe7dc7fae643b28df9d738c655.jpg

Nice!  I'm sure there's nothing there you can't work out!

do you put a bushing on your router table? I have to come out of the raef cave more often I am a little surprised at the things that have never occurred to me.

do you put a bushing on your router table? I have to come out of the raef cave more often I am a little surprised at the things that have never occurred to me.

 

Not a bushing, a bearing.  He's using a flush trim bit and riding along the template.

Ok, when I seen it for some reason I was thinking pattern down.

Ok, when I seen it for some reason I was thinking pattern down.

 

You can get flush trim bits with the bearing on the top as well.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.