Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Toyboxes to be made in Santa's workshop.

Featured Replies

  • Replies 118
  • Views 18.5k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • Nah, you'll be fine.  Pine is like milling butter.  You may get a little tearout at the bottom where you'll be routing uphill.  Practice on a test board!   And clean up that pattern before you rout

  • wouldwurker
    wouldwurker

    I'll use water based finish when they pry the VOC's from my cold dead hands!

  • Started the 'carry toy boxes' this evening for Christmas presents for friends' kids. I made a similar one for my son in March. Milled all the lumber (pine) this evening, planed, ripped and cut.

Posted Images

  • Author

6 days not in the shop...darn houseguests.

Boxes sanded to 320 and chamfered at the router table. Chamfered the grasshoppers while I was at it.

Here's a feedback loop of toys.

69e428934fbc6908326cee058b9222c4.jpg

  • Author

Finish sanding complete, rounded over on the router table, edges eased for tiny fingers, hit with a leaf blower outside, microfiber rag, and tack cloth.

Now let's finish these bad boys 0b59d09c78c5d4ffcc6b5d6062716f37.jpg

Hell...  We've been waiting for that for a week.... ;)

  • Author

Famous last words, " this should take about an afternoon....I'll skip the Purple Heart keys, rough em together, and throw some Danish oil on it...easy peazy"

Then I go nuts...like always. :o

Awesome work! I dropped the ball on Christmas builds this year I think I made a dozen kitchen tongs and three cutting boards. Can't wait to see them finished

Make those stackable and I'll take a dozen or so...

You will just make em for me if I supply the wood and beer right?

Dare ya to tap that lid down on the can where it sits!!

  • 3 weeks later...
  • Author

January 8th, and finished just in time for Christmas...

 

I don't want to rehash an old issue that seems to get people fired up, but I really really tried to go "certified non-toxic when cured" on the finish.

 

Started with two coats of Watco butcher block (which on a cutting board, built up a really thick finish), and wasn't satisfied.  Then applied THREE more coats of GF Toymakers finish.

 

From what I gathered, Toymakers finish is exactly the same as GF Salad Bowl, which is exactly the same as Seal-a-Cell, but for the certification process.  Even on the GF website, when you click on several links for Toymakers Finish, it takes you to Salad Bowl finish pages/documents.

 

Anyway, after 5 coats, it still looked crappy to me.  Plus, I could scratch a half inch into the wood with my fingernail. Scuffed and de-dusted for the 6th time and applied one coat of arm-r-seal.   Now it looks fantastic.

 

Now... in the past, I've finished all my kid's stuff with arm-r-seal and let em' gas off/cure for 3-4 weeks.  I'm comfortable with my own kid playing with arm-r-sealed stuff, once cured.  I thought I should go the 'certified non-toxic' route with other people's kids, but neither provided any protection, and I do like my oil-base.  I also think 5 coats is nuts for little to no finish buildup.  (yes, I'll likely go waterborne when I cut my teeth on the HVLP).

 

Anyway, the carry toyboxes will be packed, shipped, and delivered to 4 kids, ages 0-2.  I will include my usual note, 'handmade with love with the following species of wood...' , but will also advise to let it fully cure on an out of the way shelf for 3-4 weeks, or until it doesn't smell like finish.

post-15261-0-92526200-1420728606_thumb.j

  • Author

I thought I was done...and they looked good enough...but good enough wasn't good enough. So because I'm in an obsessive compulsive maniac I felt the need to rub them out with Platin 500, 1000, 2000, Menzera 2000, and Menzerna 4000. I didn't bother to wait to let it (fully 3 week) cure, so I took it pretty easy with sanding pressure. It's so hard to explain the difference...The gloss comes down a notch but the shine is more consistent...like the hood of a new car...if that makes any sense.

Mostly though it's all about the feel. Baby butt smooth.

I realize these are for four kids under the age of two, one of which is going to be born this week...but I'll know how it'll feel to the touch when their folks (my good friends) take it out of the box....it feels effing awesome....like a showroom Ferrari. After that the kids can smash it around the house and have a great time. I made one for my son in March.,,still holding up and he beats the hell out of it.

And man does rubbing out make that Baltic Birch bottom look pretty.

Three down one to go. I'll bump a photo to project showcase tonight when they're all done.

af9d6577862d633be11336585e4484d5.jpg

Super nice attention to detail Vinny!  Would have been easy to quit early knowing what the future holds for them.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.