cyclingneko Posted August 10, 2010 Report Posted August 10, 2010 Hello all! I am James, a newb to "real" woodworking. I could always throw some pine boards together and make something look nice to an untrained eye. I am in the military stationed in Japan. I have been here for 5 years and planning a move back to the states in a year. Most of my particle board furniture I have is either falling apart or will fall apart in the move. This kindled my interest in making all the furniture for my house. Then when I move, I won't have to purchase 10-20k in furniture. Oh, so little did I know at that time. On base we have the luxury of having a very good art's and crafts center with a complete workshop. There is a little safety course you have to take before using the shop. I took the safety course and was surprised I didn't know how to operate half the equipment. Also during the safety course they pointed over to the wood they keep on stock for purchase. "Why is all that wood so nasty and rough?" I asked myself. Only to find out later in the course that's what those two pieces of equipment that I knew nothing about were for, the planer and jointer. Wow, I am in over my head at this point. I came home and searched woodworking, on itunes. That's when I found Marc TWW. I spent a few weeks watching all TWW podcasts, then going back through all the blogs, and also purchased some Videos. Also, during that time I have been reading over on Charles Neil's website, watching all his free videos, and also purchasing a few video's there. In that time I haven't built anything, only soaking in all the new information, and boy is it overwhelming at times. Now, I am not real sure where to start. What to make and what kind of wood to use. I have access to only three wood species Oak, Walnut, and Cherry. I like the look of all of them, the Mrs. is a fan of darker wood. This brings us to Walnut, possibly Cherry with some antique or darker stain, or maybe I could still use Oak and just stain it dark. Oak is the cheapest, with Walnut and Cherry being the same. I'm still unsure of the wood species at this point. I have two immediate builds on the table. I need a new bookcase/DVD storage, but seems like that may be a bit overwhelming to make my first "real" build. Everyday I come home, pickup the newspaper from outside the door, read the front page, then throw the paper on the kitchen table. The papers get taken out to recycle every week, making for a messy pile by day 6. A MAGAZINE RACK! Just what the wood doctor ordered. And just so happens Marc has already made a great looking rack and has a podcast on how to build it. Perfect I'll start tomorrow! Wait back to the what type of wood debate. Help me decide, Please! Quote
PaulMarcel Posted August 10, 2010 Report Posted August 10, 2010 Konnichiwa, manneki-neko-chan Hajimemashita. Koko-ni wa, takusan no sensei ga shistumon wo kotaete imasu. Sore kara, koko wa manabu no idai tokoro desu. ...or something like that If I was in Japan right now (insert long moment of daydreaming), I'd look for tamo ash. Very Japanese and I think it has very nice grain. I've purchased some raw veneer of it here, but it isn't the most common thing. I've seen a box made of tamo ash and walnut and it was spectacular with a finish. You usually will see tamo ash unfinished in Japan. I'm trying to think of where it is commonly used, but am blanking (q.v. the daydreaming thing). If anything, you might want to look around for some veneers of Japanese woods to bring back for much later in your woodworking career. If you're able to bring some wood back and the misses likes dark wood, you might be able to get reclaimed wood from minka, the traditional Japanese farm houses. Most being reclaimed are 100 years old; for decades, the center irori burned charcoal with the smoke rising straight up adding a patina to the center timbers; those are what they reclaim. Wilbur on this site is heavily into Japanese woodworking tools. It would be cool to learn what you can get while you are there that we cannot Good grief, now I want to eat moja-yaki served at a pushcart too badly... ja atode... Quote
cyclingneko Posted August 10, 2010 Author Report Posted August 10, 2010 Thanks Paul, I'll have to look into the reclaimed wood from minka's. One of my woodworking barriers here in Japan has been the availability of wood. I can't find anywhere selling anything but pine, cedar, and occasionally smaller boards of Ash. I have never seen the tamo ash. The language problem is a real problem when it comes to things like woodworking. Often using terms which the dictionary just doesn't translate. Even having a translator is nearly impossible when you start using nerdy words, like low angle bench plane. For this reason I think I am going to stick with the readily available stock which the base carries as my "main wood". I'll keep looking for that sawmill in hopes to use something exotic as an accent. Walnut and tamo ash look great together (google found a desk for me to look at.) I have not even broke the ice studying any Japanese woodworking tools. I know there planes are much different (from seeing them in shops) and I know there saws cut in a different direction (which is MUCH preferred by myself!) I hope to learn more about what I should get before leaving the island. Wish I could find a good "woodworking store" vs. all of the box stores I go to, because that's all I know. Quote
PaulMarcel Posted August 10, 2010 Report Posted August 10, 2010 GiantCypress is a blog by Wilbur, who is also on this site. He's heavily into Japanese tools and has great recommendations for the different types and configurations (like tooth configurations and counts for different operations). If you give his blog a read as well as all the sawdust goodness here, you'll likely have a pretty good idea of what to get before you leave the island, even if it won't be immediately used. Where are you located? We keep talking about 'the island' and I know Okinawa has a big base, but I think there's also some presence on Honshu. Language will definitely be the problem; when I twittered a friend in Tokyo, I couldn't find even general words in Kodansha for 'woodworking'. Seems strange for a country where woodworking is a national heritage. Regardless, searching for the Japanese words will just get you to Japanese articles; not a lot of good that will do unless you have a decent translation site. As a punt, I'd go to Tokyu Hands. I swear, that store has -everything-. Electronics, lingerie, tents, siphon coffee makers, and manga posters. Usually each floor has a couple people relatively fluent in English; popular with kids most of whom do the 'engrish' okay. On the hardware floor, you'll find pullsaws, pull planes, etc. Maybe ask someone there if they can refer you to higher end tool dealers who speak 'engrish'. Quote
cyclingneko Posted August 10, 2010 Author Report Posted August 10, 2010 5 or 6 hours later I have read 19 pages of Wilbur's blog. A lot of advanced information there when it comes to Japanese hand tools, he is a big fan of his Japanese tools that's for sure. I am on the mainland, Tokyo area. I have been to Tokyu hands several times, one of the better DIY stores of Japan. I have not asked the staff about a place for higher end tools, I'll take that idea with me next time I go. I can possibly even ask them about a wood supplier who sells to the public. Great idea! Thanks. Quote
wilburpan Posted August 10, 2010 Report Posted August 10, 2010 Hi James, Thanks for reading! I'm kind of astonished that anyone would read my blog at one shot. For that matter, I'm astonished whenever anyone gets past the first page. As much as I like Japanese tools, I don't have any useful advice for you in Japan, except to keep on the lookout for someone who might be able to teach you about these tools who can speak English. I don't know any Japanese myself, and pretty much everything I know about Japanese tools is from other folks on the internet, books, and figuring things out on my own. Because of that, I probably am missing quite a bit about these tools. So if you have the opportunity to learn about Japanese tools while you're there, take advantage of that because when you get back to the states, you won't easily come across a similar opportunity. Then you can teach me something as well. As far as your wood problem goes, I'd stick with walnut and cherry to start. It seems to be readily available to you at your base (thanks for your service, by the way), and both species of wood work well with power and hand tools. Oak is a bit tougher to deal with hand tool-wise, but it machines well. BUt if you are starting down the woodworking path, it's good to get some hand tool fundamentals under your belt early on, and so it's nice to work with woods that are relatively easy to use hand tools on. Take care, Wilbur Quote
sysiphus Posted December 11, 2010 Report Posted December 11, 2010 I know I'm way late to this party, but if they have a "Makeman" store around there, you can get outfitted fairly cheaply with handtools. 1800 JPY for a saw, 550-2000 JPY for planes, 950-1500 JPY for chisels. Not the top shelf stuff, but it beats the pants off the stuff you can get from the box stores in the states. Makeman usually has signs with a monkey in overalls, sometimes riding a dolphin. Why? Dunno. Good luck! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.