Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

With Router Table Would You Choose - from these 2 options

Featured Replies

I'm setting up a completely brand new shop in my double car garage and I know that one of the items I want is a good router table. I'm prepared to the spend the money on a good setup and I think I have my choice narrowed down to 2 options. Which would you choose and why?

1) Festool CMS-VL Kit version

I am already going to have the MFT/3 so I would could work. I would use my Festool OF 1400 router - router serving dual duty between the table and handheld work.

2) Jessem Mast-R-Lift Excel II Kit from LeeValley (fully loaded to include fence, stand, miter slide, Wixey indicator, etc) - http://www.leevalley.com/en/wood/page.aspx?cat=1,43000,69192&p=69204

for this I would purchase a dedicated non-Festool 3 ¼ HP router and keep my OF 1400 for handheld work.

These 2 options work out reasonably close in cost but with the option 2 I may lose some of the dust collection from the CMS-VL but gain the benefit of not having to remove my router from the table for handheld work. Am I overlooking any significant pro/cons of either option? How would you choose to spend my money?

I had only one router for a while, and took it out of the table for hand work. It sucks. I would have a minimum of 2 routers, but three I think is ideal (3.5 for table, 2.25 for hand held, and trim router for edge rounding).

I recently sold my router table and installed a table saw router wing (cast iron) to save space. I am very happy with it.

Depending on your router choice, some come preinstalled with a lifting mechanism.

I have used the festool router table and it is nice. It's very expensive for what it is though (no surprise though).

If I could do it over again I would have gotten the Incra table over the Kreg table. The Incra table allows you to do some great detail and intricate stuff without the need for additional jigs. Box joints, double dovetails, etc.  Throw a woodpeckers or jessem lift in that table with a Porter Cable 7518 and you're set. Still lower cost than the Festool table alone, and no need to switch routers

 

http://www.infinitytools.com/INCRA-Offset-Router-Table-Package-w_-ISS/productinfo/RTP-300/?gclid=Cj0KEQiAr9ymBRDdqYrH6Mj5170BEiQAcRUsi9UsXuHANeCzKnHo8V4UrDc7s7GPyrr3BNnMckhaYxoaAjoT8P8HAQ

I own the Jessem router table that looks like the one Lee Valley is selling. I love it. It's very well made and was easy to assemble. At the time I bought mine - there was a 3 1/2 hp Milwaukee router included in the package. I don't recall where I bought mine right now. I'm having a senior moment and just can't remember.

 

It looks like they've changed the design of the hand wheel other than that it looks just like the one I have.

I have the Jessem and really like it. Which ever table you choose, I would put the PC 7518 under it. It's a tried and true work horse that has soft start and 10 speeds. You can buy the motor can only, saving a few bucks since you probably won't ever remove it. I have the OF1400 and it's a terrific router but I would never use it in a table.

Option 2.. Anytime you're sharing a router, it's a PITA!

Plus, you just can't go wrong with the Jessem set up!

Only reason I could see for the FT router table would be job site work, carry 1 big router and put it in the table if needed.

In a shop go for the PC 7518 in a lift. I've got the predecessor( forget the number) and a 7518 both are incredible routers. When you run one handheld you really can feel the power. Running one handheld all day will wear you out !

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.