Recommended Posts

Posted

Well I had a very close call with my craftsman bench top router that about claimed one of my fingers. I was pushing a panel through and one of the plastic legs snapped and collapsed the left side as wood was on the 2.5" panel bit. I decided it was time to build a cabinet.

I put this together today with 3/4 of a sheet of birch ply. The back corners have 2x2" oak strips for weight and reinforcement.

The top is 1 3/4" thick two sided melamine that used to sit atop my KRL snap on box. I put two shorts of t track I had and bought a miter valley. I was able to use everything I already had here for this build except for the miter valley, plate insert, and dust hood. I'll finish it with oak face frame harvested from an old vanity.

Hopefully the helf and size will be enough to keep the little spinning blade of death away from me. It's definitely not pretty, there isn't any fancy joinery. It was actually quite an exercise to not over engineer it.

post-16319-0-50194700-1423460475_thumb.j

post-16319-0-74419700-1423460489_thumb.j

post-16319-0-53068000-1423460501_thumb.j

Posted

That had to be really scary!

 

I feel like that is an ongoing trend with craftsman products cheap cheap cheap and made of plastic. I have a brand new $250+ craftsman scroll saw and recently inherited my grandfathers 20 year old craftsmen scroll saw I swear to you his is better made and seems to run smoother than mine in every way.

Posted

It was definitely scary. The bench dog push pad actually did barely touch the blade.

I agree on the quality issue. The bench top piece has never been very solid, I even normally use a 2x4 across the back and clamp it on both sides to lock it to my bench. I didn't this time and could have paid for it.

Posted

I'm glad you made it out unscathed.  I had one of those craftsman table top router tables with a puny little router in it.  It was scary every time I tried to do anything more than a small roundover.

 

I was actually a bit nervous stepping up to a 3+ hp router when I bought mine and built a table to go with it, just remembering the apparent danger with my little table top model..I figured "bigger will be badder" and not in a good way.

 

I am really really glad I did.  My new router is quieter, more stable, and I feel much much more safe when operating it.

 

Good work and enjoy!

Posted

I completely understand that feeling. A friend of mine and I were working and he asked about the little table. I told him it scares the crap out of me. He looked at me like I was crazy. Unfortunately, Hindsight proves my point.

Thanks TC

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   0 Members, 0 Anonymous, 45 Guests (See full list)

    • There are no registered users currently online
  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,008
    Total Members
    3,644
    Most Online
    Bob44
    Newest Member
    Bob44
    Joined