Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

opening dust gate from across the room

Featured Replies

so i am trying to figure out my dust collection   if i have my dust collector in the middle and 3 trunks i can have the best suction over a short distance or i can put it at the end of the run beside my work bench wrap the pipe along the back and side wall and then bend towards the middle.  but then the pipe at the end will have weak pull at my jointer/ table saw ect..... 

 

ultimetly do you guys think a 1.5 hp dust collector will have enough pull to keep the machine clean over a 40-60 foot pipe? and if i put the dust collector in the middle ill be walking back and forth to the dust collector ever time i need to open the gates.  

 

anyone with more experience setting up dust collection  have any ideas? 

 

 

 

 

post-4738-0-13620600-1429969843_thumb.jp

duckkisser...sorry, but I can't help with your dust collection questions, but maybe I can save you some money.  Over in the Deals section, Vinnyjojo posted info on 10% sale at CPO on Powermatic and Jet Woodworking Machines.

 

So right now, I am trying to decide between:

This Jet:

http://www.cpojettools.com/jet-708659k-vortex-dust-collector-1-5hp-1ph-115-230v2-micron-canister-kit/jetn708659k,default,pd.html?5

 

and this Powermatic:

http://www.cpopowermatic.com/powermatic-1791079k-dust-collector1-75hp-1ph-115-230v2-micron-canister-kit/pwmn1791079k,default,pd.html?start=1&cgid=powermatic-woodworking

 

The Powermatic is probably overkill for my garage setup, but might be preferable for your setup as it has 1300 CFM vs 1100 CFM for the Jet.  It also has remote control.

 

Also...very impressive workshop setup...

 

HTH

If you keep your duct at 4" throughout the system you'll be able to pull the larger chips from the jointer and planer with decent efficiency, but it won't collect most of the fine particulates.  That's essentially my system except I have 2HP.  If you're only concerned about collecting the bulk of the mess it will work okay...if you're concerned about breathing clean air, it won't.  Table saw and band saw collection will be very disappointing, so prepare yourself for that.

I'm confused as why there would be gates at the DC unit. Every ducted system Ive seen have the blast gate at the drop to the machine. I can see possibly having a master gate at the start of the leg to "double seal" an entire run but it seems overkill with a good collector.

  • Author

Thought to have. A master seal at the main part of pipe and then have one at each machine so that I can have the best efficiency. When I'm at my back wall I open that duct when I'm on the center machines I open that duct and when I'm at the front of the garage I open that duct. That way I have a duct that is 10 ft long and not 40 to maximize my collection.

  • Author

duckkisser...sorry, but I can't help with your dust collection questions, but maybe I can save you some money. Over in the Deals section, Vinnyjojo posted info on 10% sale at CPO on Powermatic and Jet Woodworking Machines.

So right now, I am trying to decide between:

This Jet:

http://www.cpojettools.com/jet-708659k-vortex-dust-collector-1-5hp-1ph-115-230v2-micron-canister-kit/jetn708659k,default,pd.html?5

and this Powermatic:

http://www.cpopowermatic.com/powermatic-1791079k-dust-collector1-75hp-1ph-115-230v2-micron-canister-kit/pwmn1791079k,default,pd.html?start=1&cgid=powermatic-woodworking

The Powermatic is probably overkill for my garage setup, but might be preferable for your setup as it has 1300 CFM vs 1100 CFM for the Jet. It also has remote control.

Also...very impressive workshop setup...

HTH

I have a collector already thanks though
  • Author

If you keep your duct at 4" throughout the system you'll be able to pull the larger chips from the jointer and planer with decent efficiency, but it won't collect most of the fine particulates.  That's essentially my system except I have 2HP.  If you're only concerned about collecting the bulk of the mess it will work okay...if you're concerned about breathing clean air, it won't.  Table saw and band saw collection will be very disappointing, so prepare yourself for that.

Just got a new table saw from grizzly so the collection should be efficient.

  • Author

I figure anything is better then what I have now which is nothing and unless I want to buy a giant industrial dust collection system and there will always be some dust/chips the only way to not gave dust is too not make anything

Just got a new table saw from grizzly so the collection should be efficient.

Unfortunately the machines play as big or bigger roll in dust collection as the collection system. Most don't do a good job due to deign. Even large industrial systems will not do a good job with our machines.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.