Recommended Posts

Posted

I got home from work last night and suited up for my graveyard shift in the basement. I am in the midst of chewing through my enormous pile of rip cuts in my spare time. I also am working on a big end grain island this week. The island is cherry and I glued it up in two 30" x 44" x 2" laminations prior to making my end grain cuts. I find that 3' by 4' 1.5-2" thick hardwood panels are about the max I like to comfortably work with. Anything larger becomes cumbersome to effectively sand/cut in my tightish shop. Not to mention the weight really begins to get up there with oak, hard maple etc. Anyways, I was in the process of a minor flattening on the drum sander when the sand smart kicked in and I noticed the piece begin to severely bog down. Confused as hell, I scramble into action and notice the conveyor belt is shredding off the table on the outfeed side. After shutting everything down, I surmise a slight rip in the belt caught on the tiny gap between the outfeed table and the bed roller. In the process, the ripped belt bunched up and forced my workpiece to lift up into the drums by 1/8"--hence, why the sandsmart went into panic mode. These tables have been such a migraine for me. First off, they are outrageously expensive, they cost me $500+, or something equally stupid for crap metal tables. Next, the bolt patterns don't line up properly, so they sag like crazy when any sort of weight is applied. Lastly, they just cost me a belt with their micro clearance on the outfeed side. Somehow the infeed side clears the bed roller by 2", but the engineer felt the need to get the outfeed side to 1/16-1/8" of the bed. It totally makes sense--not. Now that im looking at a PITA to remove the bed to replace the belt, does anyone have experience with the rubber belts? Worth the money? Best place to buy them? Any chance they track better? Love to hear opinions on conveyor belt options. This damn drum sander has been such a money pit for me. It was a great buy UNTIL I put a 1/4" rip in my fiancé's CRV headliner--yes, I fit a 37" dual drum sander in an SUV like an idiot. The tables cost me a ton. Sanding strips weren't too bad. This conveyor belt is going to cost me a fair amount. Pretty soon im going to pay more for the add-on costs than I did for the machine. Heck, I bet im there the machine was a steal.

 

Aside from my drum sander making me want to kick every dog in the neighborhood, my unisaw is finally performing up to snuff! It only took me 2-3 months to get it to perform the way I imagine a cabinet saw should perform. I had to cross cut about 28 3" strips out of my blanks, and the ease and effectiveness of VSCT fence slide forward combined with my jessem mast r slide was awesome. It almost felt like I had a small euro slider for the 5-10 minutes I was cutting strips. The 3hp baldor motor with WWII lapped up the 8/4 cherry. It is a nice feeling when a nice machine is tuned well and performs well. Interesting juxtaposition of tool performance over the course of one evening. It couldn't be any worse when they are a turd, and you are on cloud nine when they rock. This is going to be a sweet working island - 52" by 30" and 3" thick end grain cherry. I wish I had the space in my kitchen for such a thing; I would use every square inch of surface area.

IMG_1569.JPG

IMG_1567.JPG

Posted (edited)

==>engineer felt the need to get the outfeed side to 1/16-1/8" of the bed

Did you call them on that tolerance? I really don't have experience with drum sanders, but that seems a bit close... Do you have a photo of the outfeed side?

 

==>does anyone have experience with the rubber belts?

I've got a rubber conveyor on the oscillating wide-belt sander. I'm not sure exactly what it's made from, but it's a slightly squishy rubber-based matrix with a honeycomb pattern. It grips well and the 'give' working in conjunction with the pressure rollers allow you to flatten stock when the sander is in thicknessing mode (platen set to zero, short scratch pattern). I'm not sure what the conveyor costs to replace, but it's probably $500 (it seems almost all parts on a WB start around $500) :)

 

 

 

Edited by hhh
Posted (edited)

On the bright side, you've still got half a belt to work with... 

 

Seriously though, that sucks. I sheared a gear on my belt drive about six months ago. Really chapped my ass..

Edited by Brendon_t
Posted

Yeah sorry, family is Scottish and Irish, can't tell a simple and to the point story to save or lives. Don't come over for dinner, just a bunch of people telling 3 hour stories over top of one another. 

This sander chaps my ass weekly. It saves time, but it makes me dream of the day where I have the space and power for a real sander. The half a belt made me chuckle a bit. It is so sad looking that it's humorous. 

 

Yeah, I sent a disgruntled email to supermax and they are going to refund me for the tables when I send them back. I think I'll put those savings towards the rubber belt. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   1 Member, 0 Anonymous, 56 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,008
    Total Members
    3,644
    Most Online
    Bob44
    Newest Member
    Bob44
    Joined