Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Plant table, the top

Featured Replies

My planer came with a couple of chunks of mahogany.  So I decided to make something with it for a Christmas present.  It's a plant stand.

The top is a sapele veneer. Beautiful grain pattern.

The sides were routed with  the obvious bits.

I did like working with the mahogany.  It shapes easily.

This was my first time doing a veneer.  Cutting it was a challenge until I figured out to clamp down a steel straight edge.  Then it cut perfectly. I first glued it down with 3M 77.  Seemed to hold well.  Wife proceeded to use a water-based polycoat.  It all wrinkled up. Not pretty.  She added a subsequent layer of oil-based polycoat on top of it and most of the wrinkles went away.  It's still not "right" but it will do as a learning experience. 

Note: The oil polycoat soaked in and brought out the sapele grain that the wanter-based did not.

t1.jpg

t2.jpg

Very well done Collin. Good job on the inlay!

  • Author

Very well done Collin. Good job on the inlay!

Thanks.  I'm happy with it as it sits. It was "ok" for a first project of this type.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.