Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Dry spots in finish???

Featured Replies

So I have one that is stumping me. Red birch cabinets, 2 coats of shellac, now 1 coat oil based poly followed up with 2 coats of water based poly. I am getting these spots that look "dry" but coat after coat they stay the same. Sanding in-between coats obviously as well. Anyone had this issue? starting to get very concerned... Sent from my Nexus 5 using Tapatalk

  • Author

Brushed on, it is hard to get a pic. It really only shows in just the right reflection. Just applied a 4th coat. See if it helps Sent from my Nexus 5 using Tapatalk

Does it look like the finish is soaking into the wood?

  • Author

Does it look like the finish is soaking into the wood?

Kind of, but not really. It is really strange. I have not seen anything like it. It is almost like there was something on the wood which is not allowing the poly to "stick" to those areas. They are small and faint. I am also trying to sand a drawer back down to bare wood and start over. Sent from my Nexus 5 using Tapatalk

Or silicone contamination? It's about the worst thing there is to get on any surface that is to receive a finish.

  • Author

8ffade84a39fe4e0a7c01aa558c6ebba.jpg This is what it looks like. After 4th coat. It did improve after last coat. Think I am going to roll with it and see if customer is happy. PS. For reference that spot is about an inch long by 1/4" wide Sent from my Nexus 5 using Tapatalk

I'm guessing that you're not applying enough material (water based).  It really needs to be applied liberally.  As it dries, it will lay flat and tighten up.  Will look a little sloppy as a fresh, wet application...  I'd try another coat and don't be shy with the material.  Level it out best you can, but don't over work it...  3-4 brush strokes per area and leave it be..  

What kind of brush are you using?  Foam or bristle...

Not fish eye. I think AMiller has the cure. It's amazing how much a porous spot will absorb.

 

  • Author

I'm guessing that you're not applying enough material (water based).  It really needs to be applied liberally.  As it dries, it will lay flat and tighten up.  Will look a little sloppy as a fresh, wet application...  I'd try another coat and don't be shy with the material.  Level it out best you can, but don't over work it...  3-4 brush strokes per area and leave it be..  

What kind of brush are you using?  Foam or bristle...

I am thinking you are right here. I think the red birch just had some really really thirsty spots! I am using a purdy bristle brush. Sent from my Nexus 5 using Tapatalk

Water based finishes are milky white in the can.  You should be applying heavy enough that your piece is a very faint milky color on horizontal surfaces.  Vertical is different for the sake of runs and drips :-). 3-4 strokes per area and leave it be..  Surprising how much the finish will shrink and behave...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.