Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Painting the inside of small holes

Featured Replies

I'm making cold frames for a friend's vegetable garden.  The top of the cold frame has a hinge at the back, and can be propped open.   Sort of like this

Coldframe 1

The idea is that the lid can be propped at varying heights. You control the temperature by adjusting the opening. Everything from wide open for working on the plants, to just a crack for a little ventilation..

Because I over-think everything, I'm putting short dowel pins on the sides of the lid and the case, and providing a slat with dowel holes along it's length. That way the lid can be propped up at different heights. I drilled 3/8" holes through a 2x4 and then ripped it into four 3/4" strips (two cold frames with slats on both sides).

Since the cold frame will be exposed to lots of weather and moisture, I'm painting with an outdoor latex I have left over from painting my garage door. This is a utilitarian build - function matters much more than appearance. But, what to do with the inside of the holes to protect them?

  • Just leave them unpainted - don't worry about it
  • Use a Q-tip or a dowel to paint the holes by hand - about 40 holes for the first cold frame
  • Buy a can of spray paint for the slats

Any advice?

Edited by Beechwood Chip

My first thought would be to avoid paint -- messy... I'd go clear-coat... I would use a Q-tip and CPES.

Edited by hhh

I would leave them unpainted. It's a outside piece that will weather in time anyway.

Edited by TerryMcK

My cold frame has lasted for many, many years with no finish. I wouldn't worry about painting the interior of the holes.

You may be over thinking the need for variable heights to the lid opening. The lid on mine is propped open by a 14" stick of 1/2"x1/2" pine which is loosely screwed into the interior side of the box towards the front. The stick pivots up and supports the lid at a range of about 5-8" open.

One thing you may want to consider is a chain or cord to stop the lid from opening too far. The one in the photo is up against a fence, but these ones you're building may not have a convenient backstop.

  • Author

My cold frame has lasted for many, many years with no finish. I wouldn't worry about painting the interior of the holes.

You may be over thinking the need for variable heights to the lid opening. The lid on mine is propped open by a 14" stick of 1/2"x1/2" pine which is loosely screwed into the interior side of the box towards the front. The stick pivots up and supports the lid at a range of about 5-8" open.

One thing you may want to consider is a chain or cord to stop the lid from opening too far. The one in the photo is up against a fence, but these ones you're building may not have a convenient backstop.

Great advice - thanks!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.