comp56 Posted December 16, 2015 Report Posted December 16, 2015 Awhile back my son asked me to make a wooden sheath for one of his knives, now he wants me to make a few for his sword collection.....so today I picked out some wood for a wood sheath and matching handle for one of my son's 6 swords. This one is a Bastard Sword or also known as a Hand and a Half.the wood used will be Padauk also known as Vermillion with Juglans Nigra also known as Dark Walnutanyways here is what I got so far.....have all measurements cut into 3 and marked off for angle cuts. the sheath will have walnut on an angle at top and bottom ok so it's back to square one....(no pun intended) let's say back to a solid piece of wood again......only difference is now the blade fits perfectly in the square well not really a square.....planed it down to S4S then will sand once I cut out top groove for blade handle and shape bottom end.....ok so the scabbard for the sword is complete, from the top to the bottom I tapered it by 1/8" to a rounded point. here it is after 280/600 grit sanding.....handle is next....... 2 Quote
d8nk Posted December 16, 2015 Report Posted December 16, 2015 That is cool! Sent from my Nexus 5 using Tapatalk Quote
wtnhighlander Posted December 16, 2015 Report Posted December 16, 2015 Sweet! Looks like something Willuam Wallace might carry around. Or maybe just Mel Gibson. Quote
comp56 Posted December 17, 2015 Author Report Posted December 17, 2015 thanks got handle done and put everything back together... Quote
wtnhighlander Posted December 17, 2015 Report Posted December 17, 2015 I take it from the finger grooves that this monster is intended for two-handed use? Looks great! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.