Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Bent lamination photo stands

Featured Replies

I thought I'd show off the photo stands I made my wife for Christmas (among other things). They're based on the "trendy bendy photo stand" video on the woodworking for mere mortals YouTube channel. From outside to inside, I used red birch, jatoba, canary wood, and maple.

72f5605920a1216a42560aa2b27c8e66.jpg

I made up a blank about 3 inches wide. I had to resaw the boards to get down to 1/4 inch, which I did (very carefully and with feather boards and push sticks) on the table saw. Once they were planed to thickness, I glued up the blank using about a cup of glue. I then cleaned up the blank and hot glued it to a larger board, then proceeded to rip off strips about 1/16 thick (on the outside of the blade, by setting a stop).

My bending form was one sided, made from some scrap cedar on the scroll saw. I then glued up the stands and vacuum clamped them using a food saver vacuum packer. This actually worked remarkably well, although I would recommend using tape as well to get the strips in roughly the right place. Lots of sanding and some spray lacquer later, and here we are.

I missed his video on that one, had to go watch.  Pretty cool!

  • Author

Thanks guys. My wife was thrilled, although she asked why I made her three (seemed a shame not to squeeze as many as I could out of the blank). This was a good project if you had a couple of hours in the shop over a day or two (and for using up some exotic scraps).

Looks really nice. Im kinda ignorant as how they work. Is that the finished product? Is it three different stands?

Sent from my SGH-I337M using Tapatalk

  • Author
Looks really nice. Im kinda ignorant as how they work. Is that the finished product? Is it three different stands?

Sent from my SGH-I337M using Tapatalk

Yeah, that's three finished stands. They sit on a table and if you look closely there's a slot in the top to put a picture in (created by making the middle piece in the lamination about 3/4 shorter).

Looks really nice. Im kinda ignorant as how they work. Is that the finished product? Is it three different stands? Sent from my SGH-I337M using Tapatalk

Yeah, that's three finished stands. They sit on a table and if you look closely there's a slot in the top to put a picture in (created by making the middle piece in the lamination about 3/4 shorter).

Ahhhh i see. So it is meant to hold a photo with no frame. I get it now.

Great job, they are very nice!

Sent from my SGH-I337M using Tapatalk

  • Author
  • Popular Post

This is the intended use:

047236473631b70b73b50799e0a04227.jpg

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.