Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Dust collection clog-up; first time ??

Featured Replies

I'm running a 1 1/2 hp dust system with a canister. Most of the runs are 4" metal with 4" flex to machines.

This system has ALWAYS worked well without problems....until this week.

I have worked 100% hardwood until this week when a project that is using 80 BF of pine was tackled.

What a mess.

I was planning these 12" wide 4/4 boards on a Delta 12 1/2" planner.

Right at the entrance to the dust collector there is a wire guard to stop large chunks or debris which was collecting the pine shavings.

This would build up in a hurry, shut down all chip removal, and jam the planner.

Never had this before.

I figure the cause was high chip load and long shavings from 12" cuts caused hanging in the guard wires.

I bet spiral cutters would reduce that problem. Then again, I don't see anymore wide pine in the near future.

==>I bet spiral cutters would reduce that problem

So would removing the wire guard collecting the shavings... :)

 

23 hours ago, hhh said:

==>I bet spiral cutters would reduce that problem

So would removing the wire guard collecting the shavings... :)

 

Yep I suspect 90% of us have hacked that guard away.  

I have that problem with soft maple.  Everything else comes off the planer as smaller chips but the maple it comes off as longer stringy stuff and it just balloons out and clogs it up, even with that grill long gone.  It's real fun taking down a 4 ft long 6" pipe FULL of shavings.  There's a CV1800 sitting in my cart.  Haven't been able to pull the trigger yet.  I figure my problem then might turn into it sucks my lunchbox planer up the hose ;)

  • Author

Well, it looks like the wire guard is toast.

I don't use the system to suck-up floor trash, so it should be ok with just machine waste.

I may avoid damp pine in the future too.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.