Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Router Table (TS Extension)

Featured Replies

  • Popular Post

847a0a1beb663bccfc3c3b268fb4a8f3.jpg

Its been another fairly productive weekend in the shop. Ive been using a horrid old bench top router table for a few years now so it was time for an uprade. So i amazon'd a PC 8902, the lift knob, and a Kreg insert plate. I realize the knob and insert couldve been done DIY or atleast cheaper, but it just looked like such a nice easy setup. It'll make a handsome addition to the G0690.

193d029f85b10dc9cf3a9dc6d2d6a55a.jpg

What a cool setup. $30 is alot for a knob, but its not alot for above table adjustment and bit change imho.

.

The table is a simple plywood box covered in paint. Its slightly larger thn the saws original extension so i added mounting holes to the fence rails to reduce the canti-lever.

.

For the fence i decided to make a double duty router fence/sacrificial rabbet fence and add vertical featherboard capability to both the router and tablesaw side. I debated this fence setup for a long time. A traditional router fence would have to be removed when using the tablesaw, no thanks. So if its gonna mount to the TS fence anyway, why make a seprate rabbet/t-track fence? I normally avoid do-all multipurpose shop contraptions but i think this will work out well. I also opted out of the adjustable style router fence because a: it didnt jive with this design and b: i just dont use that feature enough. I will enlarge the opening if needed for raised panel bits etc.

45c553a9ced5fb871424ac2171ed0763.jpg

On the underside i added a piece of dowel that plugs into the blowhole in the top of the Grizzly fence to eliminate lateral movement, and a magnet to hold it down tight. This magnet isnt near strong enough for vertical featherboard operations so im going to add more or perhaps some magswitches. I also closed off the router chamber for later addition of dust collection at the end of the fence. The inside of this chamber will get sealed with some kind of glue, something slick that wont collect dust and clog. Maybe PL smeared down smooth.

3935b53081d8317fb92c7b98b46340d3.jpg

The top is getting layers of polycrylic then wax before final install. All thats left is to add a miter track (after paint and finish! Ugh) and a power switch which i'll mount to the table in a safe but accessible location.

.

More to come!

Sent from my SAMSUNG-SM-G890A using Tapatalk

  • Author

Sure. Im no dust collection expert so read at your own risk ;-).

.

Here is the underside of the fence where the router bit will be. I added a block inside to reduce the size of the chamber.

809d9f7b03226cd06d605e28857646c1.jpg

And i'll be adding this type of fitting to the far end of that chamber (upper left in the pic).

905f977a35560c2acc9bdfc13c6a9658.jpg

.

With the chamber sealed off with constrution adhesive, and the router bit opening 2 inches tall and 1-1/2 wide i think it should be pretty effective. But since im currently a shop vac kinda guy its all theoretical. I may need to seal the bottom of the chamber as well but not gonna bother until i can test it out as is :-)

Sent from my SAMSUNG-SM-G890A using Tapatalk

  • 2 weeks later...
  • Author

I forgot to add the final pics of this build here. Added an incra miter track and some more finish. Short of possibly rebuilding the fence...its done! :-) bfbf9389f17b040496deac628768b848.jpg

Sent from my SAMSUNG-SM-G890A using Tapatalk

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.