Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Acrylic paint / finishing advice!

Featured Replies

Hey everyone,

I have a question about what finish to use on my project. I'm making myself a set of wooden tiles to use for a board game, about 1.5" x 1.5" x 0.75". I have 150 of them. I've sanded them down with 150grit sandpaper so they are smooth, and now I have to paint them on both sides using acrylic paint. In my head, I was hoping that after I applied the paint, I could use some glossy lacquer, giving the painted sides a really knockout shine and making the wood nice and smooth on the fingers. The problem is that I'm not very experienced with this sort of finishing, and on top of that the various definitions of what constitutes "acrylic paint" and "lacquer" are making my figuring out the chemical compatibility difficult. Could you experienced folks give me some pointers on what I need to use to get my paint/wood to really shine? At this point I have not purchased paint or lacquer, and I was hoping to apply the lacquer via aerosol can to make application easy for the number of tiles I need to coat (probably more than once).

 

Also, do I need to sand in between coats of lacquer? I thought I might have read that somewhere, but I'm not sure. If so, do I need to worry about taking the paint off?

 

Thanks!

My 4 year old painted a wooden picture frame with acrylic paint and I top coated it with shellac with no issues.  The solvent for shellac is denatured alcohol so you can even test your paint on some scrap against the solvent before buying any shellac if you like. 

  • Author

Thanks for the reply, Mike (and Gilgaron!). The reality is that the tiles have hand-painted designs- which prevents use of a spray can, although I hadn't considered enamel paint. Could I put an aerosol enamel background, hand paint the designs in enamel, and then use the lacquer like you said? 

Or do you think it would be easier to just use acrylic spraypaint for the background, do the handpainting in acrylic, and then use shellac? My biggest problem with this is that there are too many options...

 

Edit: Also, will shellac give the tiles the same smooth-feeling finish, or is that a lacquer-only phenomenon?

  • Author

Awesome. I'm planning on doing this in my basement, does shellac application suffer in the cold?

Depending on your temperature, my basement sits around 61.5-62.5 F and i use shellac down there all the time. At that temp the dry time doesn't suffer much either.

I'm with Mike on the Shellac, i started using it after reading these forums and have started to really enjoy it as a standalone finish where applicable.

  • Author

Sounds good to me. Do I need to put down multiple coats of shellac like I would lacquer? PS You guys are all super helpful, thanks!

You'll be pleased with how easy the shellac is to deal with, and if you ruin the application somehow, you can remove it with more alcohol.  As Chestnut stated, once I started using it I rarely use anything else!  It is, in my opinion, much more newbie friendly than, say, polyurethane, and it won't asphyxiate you like rattle can lacquer. 

Professionally shellac is the go to barrier coat when dealing with incompatible or contaminated finish surfaces. Rattle can or spray gun it's useful for all sorts of situations.

The darker colors of shellac are useful to  change the shade of a finish when needed. Mixing from flakes really isn't that hard.  Flakes, alcohol and a mason jar plus a measuring cup and maybe a scale if you are a bit OCD.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.