Popular Post beantobe Posted March 13, 2016 Popular Post Report Posted March 13, 2016 I have to preface the post by saying I'm an OCD dentist. Therefore, working on something that with is larger than 1 cm is a dream and, fortunately, still have the patience for small parts. This is my first project ever and, like Marc, absolutely love the design process. The focus was to get an idea for how to design and explore what styles I liked. I call this the "Triple Over Bunk Bed" because it was Over built, Over designed and Over budget. My wife asked me to build a bunk bed so our 2 year old could move in with our 4 year old. She showed me a picture from a place where they happen to also make pottery and store it in a barn. I initially said I could build it cheaper. You know how that goes. Meanwhile, my ever patient wife allowed me to spend money like it grows on trees and to take over all three bays in the garage. It took about 1 month to design and 9 months to build. Made from walnut and soft maple, using some choice figured maple for the front top rails and finished with two coats GF oil based satin arm-r-seal. The joinery was primarily mortise and tenon for rails connecting to four corner posts, but used a mitered lap with tenon as the joint for the ladder rungs wherever you see a "V" at an intersecting joint and half and corner laps to join the remaining crossing members of the two ends of the bed frame. For the mattress support, I was concerned about the 80" long bed rails bowing out away from mattress, but still wanted it to be easy to take down, so I created a rabbet along the top inside of rail and a dovetail recess for each support. On the support member itself, was also a dovetail key, but I had to hand carve the corners to fit each dovetail slot because they were cut with a router bit and I did not square the recess. For the life of me could not come up with a jig that would be better than carving it away by hand. I would love feedback on this point, especially! Three of the sides for the top bunk have 3/8" walnut panels between the rails. The back rail panels were made from different board and didn't realize how much sapwood was in it when I picked it up. I like it now, but trying to match 20 panels up with a ton of color and grain variation was mind numbing. I probably could have had my 2 year old do it just as well. My favorite part and main design element is the diagonal lattice work that joins the upper two rails for the upper bunk. Another design challenge, because I wanted the whole top to appear to be one piece, but from a practical standpoint, it needed to be three pieces. So I cut all the strips of walnut, laid them out and from the same pieces I cut (where possible) I cut and inlaid them to the adjoining post for grain continuity. There is a step from the post to the rail which I considered easing, but the hard angles on the rest of the piece it made the most sense to leave it as is. The walnut strips are epoxied into a continuous dado and to each other with dominos. I was able to use some of the sapwood in the walnut to make a sort of "Ombre" (as my sister calls it) color transition up the ladder into the top maple rung. This was a design element that I didn't consider, but reminded me a lot of what teeth really look like: yellower at the gum line and gradually lighter towards the top (If they look black as walnut, you should go see your dentist right now). No one really notices this about natural teeth until they get a cheap crown. I am fortunate to have the means to buy nice tools, but wrangling this long stock during milling, joinery and even glue up was still the pits! The end with the ladder I glued up all at once with titebond III and I promised I'd never do that to myself again. There are a thousand other things that I learned from my mistakes. A very special thanks to Marc, Matt and Shannon and the forum, of course. Thanks for your ingenious ideas, clear teaching and hard work to keep the forum and podcast going! -Brian 5 Quote
Chestnut Posted March 13, 2016 Report Posted March 13, 2016 Beautiful. The lattice on the top is an awesome design idea i really like how it adds depth to a flat surface. The rungs for the ladder is another cool idea and came together very well. The panels that you made that are against the wall and behind the mattress are really nice it's almost a shame to push that up against the wall. I really like where you store your festool track. That's a clever idea something i may borrow some day (probably not for festool track), I'd have never thought to store something there. Quote
beantobe Posted March 13, 2016 Author Report Posted March 13, 2016 Thanks for the compliments. I know what you mean about putting the panel against the back wall. I couldn't think of an easier/cheaper way that would provide continuity with the other two panels. maybe a dyed ply? tried to put most of the detail work that mattered on the two show faces. Can't take credit for the festool track storage, though I can't remember who to give credit to. My garage repair guy just about flipped his lid when he saw it. Apparently I will need a stronger spring when it blows up on me in the future... Quote
Llama Posted March 13, 2016 Report Posted March 13, 2016 Nice job Brian. Looking forward to seeing more. Quote
JosephThomas Posted March 13, 2016 Report Posted March 13, 2016 Awesome. What are the dimension of the 'ladder steps'? Quote
-MattK- Posted March 13, 2016 Report Posted March 13, 2016 I love that transition in wood colors in the rungs - really nice attention to detail! Quote
beantobe Posted March 14, 2016 Author Report Posted March 14, 2016 Awesome. What are the dimension of the 'ladder steps'? 9 1/2" x 1 1/2" x 2 1/2" Quote
JosephThomas Posted March 14, 2016 Report Posted March 14, 2016 Thanks! Do those dimensions feel sturdy with an adult on it? Sent from my Nexus 5 using Tapatalk Quote
beantobe Posted March 14, 2016 Author Report Posted March 14, 2016 Thanks! Do those dimensions feel sturdy with an adult on it? Sent from my Nexus 5 using Tapatalk Absolutely. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.