Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Unsure

Featured Replies

Hello everyone! I am brand new here and have little experience in the wood finishing department. I stained some mahogany doors yesterday and not sure of the results. I did not use a conditioner and thinking I should have as there is quite a color contrast in some areas. I hit any rough spots with 120 grit by hand, then a 220 grit sanding sponge over everything. Minwax espresso oil stain brushed on that I let soak in for a bit before wiping with a rag. Is this just the way mahogany takes stain, or did I screw up somewhere?

Thanks all,

Jesse20160528_145122.jpg

20160528_145114.jpg

Mahogany is a pretty open and porous wood.  Sanding only to 220, I would expect results such as you have (which I like BTW).  If you were after something else, conditioners, a shellac wash or sanding to a higher grit will all result in different appearances.

This frame was sanded to 220, shellac'd and sanded through the grits to 400.  I wanted the shimmering of the chatoyance but, also wanted a satin feel to the surface.  The shellac at 220 gave me the stark differences in coloration and acted as a binder to firm up the fibers and restrict further deep absorption.  I got the satin surface by sanding the shellac coats which by now are coating the actual material (finishing the finish so to speak).

11-14-frame (24).jpg

This bookcase was sanded to 400 and finished with a clear oil/varnish blend.  You can see the coloration is more consistent.  I flood the surface all at once, let it stand for a bit and wipe it off as if I have changed my mind ;-)

B-GnG-BC-pre-wax-base-detai.jpg

This mahogany cousin (sipo) was sanded to 220, oiled, then sanded to 320 and topped with and oil/varnish blend.

GnG Wall Cab (169).jpg

You can influence the coloration in your material without having to dye or stain it.  You are after a much darker color so the stain will get you there.  I like the look of the door and think it will pop once top coated.  If the very obvious figure is not to your liking I would strip it and run through your sanding protocol but, going to a higher grit.  Condition it with a 1 pound wax-free shellac or a commercial conditioner and stain again.  Remember your topcoat will make the coloration more intense.

  • Author

Thanks gee-dub, I appreciate the input. Your work looks great! I was so thrown off I guess because all the mahogany pictures I've looked at seemed so uniform in comparison.

Wtnhighlander, thank you! The doors came pretty smooth (at least I thought) so I only used the coarser paper on some of the trim pieces where there were some fibers standing up. 

What a noob I was thinking 220 would be overly fine!

Thanks again

Im no expert but I find it is also best for me not to let the stain soak in..Once its dry if I need to I will try to blend in any light area with stain.

  • Popular Post
39 minutes ago, UHI said:

The doors came pretty smooth (at least I thought) so I only used the coarser paper on some of the trim pieces where there were some fibers standing up. 

What a noob I was thinking 220 would be overly fine!

Thanks again

A little more fodder for your sanding protocol thought process.  The dust created while sanding will fill every little fingerprint and crevice on your hands.  If you sand and then run your hand over a surface it will feel "really" smooth.  Now without doing anything else, wipe or wash your hands and blow or vacuum the surface clean; now run your hand over it and see how it feels.

I find that being consistent in sanding every surface I am after, blowing off the spoil and then moving to the next grit and again, be very consistent to go over every area . . . .rinse and repeat . . . gets me the surface I am after quicker and with less follow up or touch up.  When it comes to sanding it may seem like you are taking longer to be doggedly thorough but, in the long run you are saving time.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.