Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Grizzly G0715: Rewiring for 110v?

Featured Replies

So, I'll be pulling the trigger on a new G0715 soon. However, I'm only renting my house, so wiring up 220 isn't an option. If I owned the place, I'd do it in a heartbeat, but I don't, so I can't. That being said, the Grizzly can be wired for 110 provided I shell out the extra $6 for the 20A breaker. The website suggests that I hire an electrician to do the rewiring. I haven't done a lot of work with electrics before, but, I mean, I'm handy enough. How difficult is it to do? Is it something that an amateur really should stay away from, or is it something that a person who is good at following directions can do?

Thanks!

Not hard at all.. I hate electrical work with a passion and did it in about 10 minutes.

It's not too difficult, you can probably find a youtube video to help guide you. But yes it is dangerous, be sure to follow the obvious advice about keeping it unplugged while the electrical panel is open, tighten all the connections  well, etc...

  • Popular Post

Before you change that breaker to a 20A, make sure the wire is #12, not #14.

The saw is easy.  It's moving a couple jumpers and taking apart the switch to change the breaker, which you'll buy from Griz.  You have to cut the plug off and add a new plug, too.  Like Kev said, 10 minutes and done.  The manual is really very good in this aspect and explains it step by step.  I don't know 'ish about electrical, and after asking advice on what gauge wire to add, changed my saw over to 110 and added a much longer power cord without a hitch.  The included cord is only like 6 feet long.

I'm assuming you are talking about the saw's 20 amp breaker, and not your home's?

  • Author
23 hours ago, bleedinblue said:

I'm assuming you are talking about the saw's 20 amp breaker, and not your home's?

Yup.

 

Thanks, all! I did some YouTube digging and looked at Grizzly's documentation, and yeah, this is well within my ability. I appreciate the feedback!

  • 2 weeks later...

It is easy to change. The manual shows how to do it, but for mine Grizzly did not include the small bridge piece required. I just cut a short wire to make the bridge. Make sure you inspect the saw blade alignment immediately when you get the saw. Verify it stays aligned with the miter slow while both raising and lowering the blade.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.