Rex Edgar Posted August 12, 2016 Report Posted August 12, 2016 I'm in the planning stage of a commemorative plate display. One plate in a round frame with a round piece of glass cut to fit. My question concerns the nomenclature of the bit I need to use/get. I'm thinking of two pieces for the frame with a semicircle cut out of each and then joining the halves to secure the plate. What bit do I need to channel out the two semicircles to accept the glass disc? Quote
Rex Edgar Posted August 13, 2016 Author Report Posted August 13, 2016 Disregard, I found what I was looking for: Slot Cutter Quote
wdwerker Posted August 13, 2016 Report Posted August 13, 2016 4 tooth slot cutters work better for me. Get a 1/2 shank arbor if your router will take them. I have bent 1/4" shank slot cutters and it will scare the crap out of you ! 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.