Vet "65" Posted December 31, 2016 Report Posted December 31, 2016 I have a Jet DC-1100 dust collector that was purchased new several years ago and I am now having my first problem with it. I have really "fine" dust coming from somewhere and I can't seem to find the source. Any suggestions where to start ? I have never done anything with this tool before. I am just a novice woodworker but would appreciate any help. Thanks. 1 Quote
Tpt life Posted December 31, 2016 Report Posted December 31, 2016 Welcome to the forums! A lot of air flow problems are diagnosed with smoke cannisters. These can be junkyard rigged with an eye drop type container and fine powder. Just wear something so you don't breathe it in. Candles are also used, but you need to be aware of any flash risk in your shop. Quote
4square Posted December 31, 2016 Report Posted December 31, 2016 It may be time for a new filter bag. I have an older Grizzly D/C. Had to replace the filter bag a couple years ago. Also check the impeller to make sure it's not bent up or broken. Start checking the joints (blast gates, tee's, elbows etc.) for leaks. This can be done using a box lighter while the D/C is turned on. Quote
Brendon_t Posted December 31, 2016 Report Posted December 31, 2016 Smoke container is the safest. Auto parts stores will often loan them for a returnable deposit Quote
Andy Wright Posted December 31, 2016 Report Posted December 31, 2016 Dump a bag of flour into the DC system and you will see a white cloud coming out of your leak Quote
Tpt life Posted December 31, 2016 Report Posted December 31, 2016 43 minutes ago, Andy Wright said: Dump a bag of flour into the DC system and you will see a white cloud coming out of your leak Better yet, set up a black light... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.