ncfowler Posted January 25, 2017 Report Posted January 25, 2017 I was looking at these table top cnc's for my bird houses, I was thinking of engraving birds and plants on the side, https://www.amazon.com/Engraver-Machine-Milling-Carving-Engraving/dp/B01K9SHE8I/ref=sr_1_2?s=aht&ie=UTF8&qid=1482761541&sr=8-2&keywords=DIY+CNC+3+Axis+Engraver+Machine any thoughts Quote
wdwerker Posted January 26, 2017 Report Posted January 26, 2017 I would definitely want to see way more reviews before I dropped any $ Quote
Marmotjr Posted January 26, 2017 Report Posted January 26, 2017 Reading some of the reviews, I'd pass too. It's kinda ambiguous about what board it's running. One line says it will take any Arduino (atmel328) board, but then it says it has one. Some of the reviews have reported a lot of missing parts, and some are saying that you still have to go buy more parts. For the size of this machine, you could build it yourself, from scratch, for around the same price, probably not too much more. The arduino code, in full, is available opensource. An arduino board is only a few bucks, and once you get your head around the "fanciness" of it, very easy to install and run. The parts are all off the shelf extruded aluminum and parts. Some steppers, some steel rod, your good to go. Yes that's an oversimplification. At a 6"x4" work area (what they are calling stroke), it might fit your needs for birdhouses, but not much more. You could easily build one that does 12"x12" or so, for just a bit more than they're asking. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.