Popular Post Tom King Posted March 9, 2017 Popular Post Report Posted March 9, 2017 I needed to figure out these shutter stays for myself, so I cobbled up a blacksmithing setup using stuff I already had. It turned out to be a lot of fun. This is one of the shutters I made that you can see the texture in this harsh sunlight angle. The windows are almost 4 feet wide and 8 feet tall. At ten feet off the ground, and window stool height well below knee level, you are risking your life to lean out, and operate regular shutter dogs. I needed to come up with a design that was safe, and easy to use, while not getting too far out of keeping with this 19th Century museum house. The latches are genuine correct period originals that I found on ebay. The shutters and stays are just a few weeks old. The plane tracks you can see in this sidelighting are 4 thousandths deep smooting plane tracks. The plane tracks you can see in this harsh side lighting are 4 thousandths deep smoothing plane tracks. The panel is one that I flattened last Summer in a video, and no glue on tenons for the stiles and rails. All parts are easy to take off for repainting, or repair in the future. The attachment to the shutter is a "J" bolt I bent from old stock plain 5/16" bolts that we had to rethread some so they could have a nut on both sides. The nut on the hook side keeps the hook from rubbing against the shutter. The other end of the J-hook turns back into a hole about 3/4" deep to keep it from turning, and the hook from coming off. The only tool I had to buy was a cheap bending rig off ebay. It worked great. edited to add: The shutters are much larger than they look in this picture. They're close to 2 feet wide, and 8 feet tall. The window sill is below knee level, and over 10 feet above the ground below. With regular shutter stays, you were risking your life to operate the shutters. I came up with this design so the old ladies watching the house can safely operate the shutters. They stay closed when the museum house is not open to the public, to keep the Sun out, and to protect all the old stuff in the house from fading from the Sun. 4 Quote
Tpt life Posted March 9, 2017 Report Posted March 9, 2017 I would love to have people pay me to do that kind of stuff but am too far past building that clientele in this life. Thanks for sharing. Quote
Popular Post Tom King Posted March 9, 2017 Author Popular Post Report Posted March 9, 2017 I had never done any "blacksmithing" before, but found it fun. We were lucky that no one got burned in the process. Here's the "forge". Just some old, leftover fire brick, and a MAPP gas torch. It heated up the 5/16" A36 rod fairly quickly. Here's my blacksmith shop. On the lee side of a porch pier, with my 65 pound anvil on the ground, a metal chop saw for cheating some, a bucket with piece of plywood to sit on, and a 24 oz. Estwing. Shaffer, I'm amazed that people pay me to do stuff that I have never done before too, even when I offered to get probably the most experienced Blacksmith there is to make what we needed. I do stuff most days that I have never done before. We made the brackets to store the hooks in the closed posititon this morning. I'll try to remember to take a picture tomorrow. You unhook the stay, pull the shutters closed, latch the latch, and store the hooks. What was scary, almost impossible is now easy, and safe. The old windows work great too, with hardly noticeable weatherstripping with no new holes in any of the old stuff, but that's another story. My helpers found out what "having too many irons in the fire" meant in the process. edited to add: I don't have any specialized blacksmithing hammers. I just used one of my heavy carpentry hammers, and it worked fine. 4 Quote
prov163 Posted March 9, 2017 Report Posted March 9, 2017 That's cool Tom. I love to watch a good blacksmith at work. There used to be a living 1850's village called Westville about an hour south of me and they had a blacksmith. My wife would wander around looking at all the other crafts people and I would just watch the blacksmith for an hour. Its great to challenge yourself and I'm sure it feels great to be so happy with the end product. Kudos. Quote
drzaius Posted March 9, 2017 Report Posted March 9, 2017 That's a cool project. I've farted around with metal a bit too, & it's lots of fun. Sure is dirtier that working with wood though. Quote
Tom King Posted March 9, 2017 Author Report Posted March 9, 2017 That's why I set up outside. You can tell where the "black" part of the name came from. Mistakes can be corrected a lot easier though. You just beat it back into the right shape if you mess up. I have/had a 24x40 shop for doing metal work with mostly cutting and welding, and mechanic work, but it got taken over by the Wife and grown children using it for storage, so now I need to build a dedicated lean-to room off the back of it for doing metal work. Quote
drzaius Posted March 9, 2017 Report Posted March 9, 2017 My son just borrowed my shop/garage to clean up his trailer brakes & wheels. Ugh, left a fine film of that filthy horrible clingy dust everywhere. Quote
Tom King Posted March 11, 2017 Author Report Posted March 11, 2017 Other than the little scroll on the eye end (made mostly the old fashioned way), here's the high-tech bender I used to make the other bends: http://www.mansiontools.com/mighty-rod-bender-mr-01-metal-bending-and-forming-tools.html?channelid=GoogleAdwords&gclid=Cj0KEQiAuonGBRCaotXoycysvIMBEiQAcxV0nOC_8jII3X7tIFF4yT8nx0E5pWV7OOUP0bijuH0KK4oaAigp8P8HAQ That was the only new tool purchase that this job required. I wonder if Festool makes one. Quote
Tom King Posted March 12, 2017 Author Report Posted March 12, 2017 We're about winding up that job. My next job will be jacking a 1780 house back up to level, and completely rebuilding the stone foundation under it. It was originally built on top of the ground, and then they dug a basement. It caved in, only leaving poor remnants holding it up. It's been patched poorly since it was built. We're going to get the house back up to the proper level, and rebuild the whole foundation. It will have modern footings under it, but still be built to look like the original dry stacked stonework with no mortar showing. All the original stones are there in a tumbled down jumble in the basement. Also, the ground around here is full of that type of sandstone. That house is a traffic free 7 miles from where I live. It's the one we hewed the replacement main center beam for on my Structural webpage, and the one on the Basement Waterproofing page of my website. Water stood under it for a couple of hundred years, but since we waterproofed it, you can kick dust on the basement dirt floor now. I have no idea how long it will take, or how much it will cost. The only thing I guarantee is that it will be done the best way possible when I get through with it. They're anxious for me to start. The people we are finishing up the house with the Cypress shingles, and shutters are disappointed that I can't start their reproduction kitchen yet, but understand that the Dromgoole house can't keep waiting for me. I'll be 67 in June, but hope I will be able to keep working for some years. I enjoy going to work every day, and they don't complain about what I charge. 2 Quote
Tpt life Posted March 12, 2017 Report Posted March 12, 2017 Yeah, when I first saw your site I should have sold everything and driven out to beg to be your apprentice. Everything you do is something I love, but needs a historical context with those who appreciate it. Carry on with vigor! 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.