weelis Posted April 21, 2017 Report Posted April 21, 2017 I have model 28-280 of this saw. Removed lower blade guide assembly to clean up since it was "gunked: up. I n doing so, I have 4 1/2 by 3/4 metal wedges with 2 coil springs that fell out of assembly. Does any one know how to reinsert these pieces.?Not sure of their functioin but probably ought to reinsert. Owners manual no help. Very little help on line. Hoping someone out there knows what I am talking about. Thanks. Quote
Llama Posted April 21, 2017 Report Posted April 21, 2017 Post a picture, and someone might be able to help. Quote
wdwerker Posted April 21, 2017 Report Posted April 21, 2017 I've got a 14" Delta. Pictures would help. I replaced the upper & lower guides with the Carter ball bearing ones. Might still have the old ones in a drawer. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.