Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Finishing a bar

Featured Replies

Hi guys 

just need some advice 

i have a cedar slab bar top and ages ago i used polyurethane on it and it started bleeding/blotching from the knots.

iv sanded it back and have seen I should use a seal coat then polyurethane.

my problem is i live in New Zealand and cannot get shellac sealcoat de waxed I can only get the clear coat that says I can't use polyurethane over top of it.

so any ideas? Should I just do it anyway?or I could oil instead of poly... but I really want the durability that the poly will give me.

so yeah I'm new to all this so help will be much appreciated ( also dumb it down ) 

cheers 

If you let the shellac stand overnight most the waxy solid will sink to the bottom of the can. Use a turkey baster to suck the shellac from the top of the liquid and decant it into another container, glass if possible.  Let that stand overnight and look for residue in the bottom of the container.  Repeat until there is no residue and you will have a greatly reduced wax content shellc.  Do a test board with your poly over this resulting shellac and I think you may be fine.

You don't really need to use the shellac as a first coat though, even though that's a good tip from the dub.  Seal coats are handy when you're working with a blotchy species, which cedar of any type typically isn't...or if you're working with a particularly oily species - again - don't really think cedar fits that bill either.  It ain't cocobolo.

As long as you have a thoroughly sanded surface that's free of all old finish, you can just start wiping varnish on it.  Concentration of the poly and number of coats is up to you...just remember the more coats you have the more plasticky it gets...you have to find that balance between protection and aesthetics, which is why wiping varnish formulas are much better than straight poly...takes a bit longer with more coats, but you have better control of the film you're building.

  • Author

Thanks for the great suggestions guys. Iv varnished it twice and each time it blotches from knots this is actually my 3rd attempt, now I'm start to think what I have may not be cedar. 

 

Thanks again 

Knots won't absorb as much finish as the surrounding areas because they're much more dense than regular long grain.  It might take several coats, but eventually you'll build a film thick enough that all areas should blend.  Make sure you're giving enough dry time between coats.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.