Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

edge trimming jig

Featured Replies

  • Popular Post

in another post, i was discussing options for trimming edge banding. i made the one below tonight, similar to this one:

image.jpeg.4154575f82f3c169d58424156af3ffbc.jpeg

 

here is the one i made.

 

image.jpeg.299ec273b0184aec98be96cbd081dfec.jpegimage.jpeg.bf48eac04d0e65b12f06a278e15aa8a7.jpeg

 

the results were quite good on this test piece.

image.jpeg.e9d19aa42e191ebb069110b3c8ec6958.jpeg

the jig is a bit crude, and i will probably make another version. thre hardboard baseplate could be replaced by acrylic, which would make the work far more visible. i thought it would be top heavy, but its quite well balanced. all in all, it a very good solution.

That is cool! Almost fool proof. Thanks for sharing

Looks like it will work well.  It will only work with that one specific bit, right?  Would be interesting to make only that is adjustable for various diameters.

  • Author
4 minutes ago, wdwerker said:

That's what I was thinking, adjustment to fine tune it. But if it works leave well enough alone.

The screws are placed in oversized holes, so some fine tuning can be accomplished. It went together quite well though, so I didn't need to adjust much.

  • Author
7 minutes ago, Ronn W said:

Looks like it will work well.  It will only work with that one specific bit, right?  Would be interesting to make only that is adjustable for various diameters.

Not sure why I would need to swap out the bit for a larger diameter one.  I sized it for 1/2", so that's plenty for edge banding (iron on or shop made).

Oh, I agree with you.....It's just my engineering brain thinking out loud.

8 minutes ago, Ronn W said:

Oh, I agree with you.....It's just my engineering brain thinking out loud.

Must have been the potato pancakes? I'm still in a daze. Those things are wonderful! 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.