Marmotjr Posted June 17, 2017 Report Posted June 17, 2017 Looking to replace the paper on my drum sander. I just apply it with spray adhesive and a bit of cursing. Came across this in my searches: https://www.amazon.com/60-Grit-Sandpaper-Strip-SuperMax-Sander/dp/B00CVR67NY/ref=sr_1_112?s=power-hand-tools&ie=UTF8&qid=1497737639&sr=1-112&keywords=drum+sander Is there anything special about the supermax 19-38 system that would prevent me from gluing this to the drum? Ie velcro, fuzzy back. etc? EDIT: For clarification, it's a homebuilt, lathe based, sander. I'm just thinking about using the supermax paper, not a supermax itself. Quote
gee-dub Posted June 17, 2017 Report Posted June 17, 2017 There is a clip at one end and a spring tension clip at the other that keeps it tight. 1 Quote
B1rdhunter Posted June 17, 2017 Report Posted June 17, 2017 It is just rolls of Klingspor paper in the boxes I just bought. Nothing on the backing. 1 Quote
gee-dub Posted June 18, 2017 Report Posted June 18, 2017 14 minutes ago, Marmotjr said: Is that on the paper itself? No, it's part of the machine design. It's a refinement of the old Performax system that causes so many people grief. I can change paper in about a minute. I don't hesitate to change grits because it's so easy which gives me better overall results. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.