Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Why am I getting this white glaze while sanding.

Featured Replies

Its been 15 years since shop class and I don't remember this happening. I am on my second coat of oil based fast drying polyurethane. I used steel wool after the first coat to remove the air bubbles and help even it out some and prepare for the second coat. I came across a slight glaze but nothing like this. I used a 320 sponge sanding block on the second coat, now it has a milky white glaze across it. Did I not sand enough or was it to abrasive? I let it dry for almost 48 hours due to a weekend away. I had been wiping dust away with a microfiber towel and blowing the dust out of the nooks with my compressor. I tried a damp towel with no change.. Any ideas?

 

 

This is for a "foot board" on a platform bed that will be acting like a step for an 80lb English bulldog. That's why I'm hoping to apply 3-4 coats to give it that extra strength.

0619171352a_HDR-1.jpg

Hard to tell from the pic. Was it a matte poly? They have flatteners in them that can make a finish look hazy and cloudy if you don't stir really well before applying. Something like what you are experiencing also can result when the finish is not properly cured before sanding. Since you said you let it dry for 48 hours, it seems unlikely that it is that, but sometimes finishes can take a lot longer than you would think to cure. Oil based finishes in particular can take a long time. 

poly is plastic.  When you sand it, you scratch the plastic and get that white haze.  it is more of an opitcal illusion than anything - the abraded surface leaves little valleys that absorb light and look hazy.  When you add another coat, the poly will fill in the uneven surface and all will be right in the world again.  

  • Author

Miniwax Fast Drying Polyurethane Clear Semi-Gloss.. Is was clear as could be before I sanded it. And it was a very very light sand.

  • Author
1 minute ago, Mike. said:

poly is plastic.  When you sand it, you scratch the plastic and get that white haze.  it is more of an opitcal illusion than anything - the abraded surface leaves little valleys that absorb light and look hazy.  When you add another coat, the poly will fill in the uneven surface and all will be right in the world again.  

Thanks so much, that's what I was hoping since it could only be seen at certain angles.. I guess I should have mentioned that

Yet another haze with Minwax Fast Dry. Maybe it is sanding scratches, maybe it is that trapped moisture or whatever it is that so frequently causes haze with that product. 

  • Author

I just added the 3rd coat, ill update as I go on thru the finishing process.. Something I have noticed is that the finish seems rather "thin" after drying. 

  • 2 weeks later...

What you're seeing is the high spots sanded down, (the haze part) the clear parts (shine) which is the finish untouched by sanding. I would add about 3 coats of finish to get a nice build. Then sand till you get a nice even haze, careful not to sand to much and get sand thru. Then apply one more as a final coat, call it done.

 

-Ace-

Unfortunately it's going to feel just as smooth and silky to your bulldog as it does to you and probably won't provide him with much traction. Which would be a good thing if it were close to my bed:D!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.