Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Zebrawood Enlargments

Featured Replies

I have a bottle stopper blank of zebra wood, with what looks like birds' eyes (enlargements) all over it.  Looking @phinds site, I see that these are not common, but not rare either. 

My question is, how deep do these usually penetrate the wood?  Do they change frequently as one goes down through the wood, or do they run fairly deep? 

I ask because it kind of affects how I plan to turn it.  I might turn it facegrain, so the enlargements will sit upon the face/top of the stopper if they don't run deep.  But if they do go deep, I'll turn it like a spindle and hope they appear all over the piece.

It's only a 2" cube, so there's not much to go on, and of course, I won't really be able to know till I actually turn it. 

Do you have pictures?  I've never seen birdseye in zebrawood, and I've seen a lot of zebrawood...I'd be interested in getting a glimpse of that.

Birdseye is enigmatic stuff.  It can be heavy in one area of a board and completely absent a foot over.  But if you can see birdseye on both sides of the board, most likely it has it through-and-through.

  • Author

 

Here's a couple from Hobbithouse, I'll get pics of my blank shortly:

zebrawood%2042a%20s25%20plh.jpg

zebrawood%2043b%20s25%20plh.jpg

  • Author

Glad you asked for photos.  Looking at the end grain, I couldn't see any of the eyes, but I think I see a couple in the pics.  I don't think they run deep.  And yes, that's the entire blank.  The other two sides are too rough to see any detail.  And I've been stepping up my macro photo game, but in hand the eyes pop a lot more than they show in the photos.  I need to get a macro ring light. 

2017_07_14_01348.thumb.JPG.56ac0bf0815bae58948c792e101fe643.JPG

2017_07_14_01349.JPG.b5819757e85d9a7c57a7b32769c74544.JPG

2017_07_14_01350.JPG.e357fa91cbe7d279ad15d4c4171efaa9.JPG

2017_07_14_01351.JPG.133375bc1c0f79fbd5049384bda792fa.JPG

 

 

Yeah I can see them.  They're light but definitely present.  They're always harder to see on end grain...but I'd bet anything that it's consistent all the way through on a small piece like that.

The ocular striation on the given sample exhibits something cool! :) 

20 hours ago, Eric. said:

I've never seen birdseye in zebrawood, and I've seen a lot of zebrawood

@Eric, you'll notice he doesn't say they ARE bird's eye figure, just that they look a bit like that. As you'll see on my site, the text that accompanies those pics does not call the figure bird's eye, I just point out that it's a bit of an unusual grain pattern fluctuation and in the end grain you can see that it's caused by what appears to be either adventitious buds or aggregate rays.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.