Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Out Feed Table Build

Featured Replies

 

I have been needing an out feed table for my saw for quite a while. A couple of days ago I had the idea to use my flip top planer stand as the base for it. Mostly made of scrap but I did buy a 2'X4' piece of 3/4 MDF.

 

Used some scrap 4X4 fir that had notches in them. These were misfits from my bench project that I had to remake. Then I added some 2x4 fir with glue and screws. The notches will be handy later on.

 

a7c987e5a251bbdaa0493561f377c92c.jpg

 

Gluing and screwing on the 3/4" MDF sheet. Cut it to 24X30.

 

7dfc7c34a5e8ec8dc0fb01f7a084cf8f.jpg

 

Then I glued and screwed 1/4" plywood I had on hand. Then glued on 1/8" hardboard and clamped like crazy. No screws on the top.

 

59b33e9c98defefe549180854dd783aa.jpg

 

With that combo of wood it sits 3/32" below the table saw top. Routed in slots for miter gauge runoff. Not the best router work as a little slip made part of one slot ugly but it is just for the shop so annoying but now worth a rebuild.

 

f404a984f2a0a6b464878aa6b985d989.jpg

 

The slots let me use small F clamps to hold it on to the top of the flip cart.

 

505af901163bfa14b63a3354e0f5b94d.jpg

 

Thus it can be set on top of the cart, clamped on, and be ready to go. The locking wheels make it very stable. Made the slots a bit wide so that alignment is not a critical issue. About 1/8" wider than the miter gauge track. Here it is removed. The downside is the weight is substantial.

 

360d5885f32470b60ff5a565c464d738.jpg

 

Here is the planer cart flipped upright.

 

c0313f1f7b135ba4329409d34f7e3d11.jpg

 

This last shot shows why I built the flip top cart. Lets me store the planer cart under the table saw wing.

 

4f3f5de4dc61314d75e96b1aafdebac3.jpg

 

 

Test cuts seem to work ok.

 

I'm smoking a brisket on Wednesday and going in to work on my classroom tomorrow so glad to get this wrapped up.

 

 

 

 

 

Great re-use of material.  My flip-top served me well for many years and is still doing duty at the old man's place.  A worth while fixture for many shops.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.