Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Winged bowl

Featured Replies

  • Popular Post

This is my fourth bowl and I'm rather pleased with it:

20170913_145537.thumb.jpg.9032dc41f078a12fb8c0d800f503b687.jpg

20170913_145716.thumb.jpg.11b49e1e4d6320ddb157ea91309feb06.jpg20170913_145659.thumb.jpg.4c1ef93f5fcc44cd3f6882a58cdc7b16.jpg

 

So I accidentally wandered into this video.
https://youtu.be/Vmz5BKXBGLA
Jimmy Clewes turns an oriental box.

No idea who this guy is, but he has a british accent, so I watch him take a square block of wood and turn it leaving these wings.  Obviously a very skilled guy with a lot of experience.

I really liked the look and it gave me an idea I wanted to try.  

Now I have very little experience, not much skill, and no accent, but hey I did have a square block of wood.  So how many more points of commonality do you need?

Here is a picture of my full size plan.  The drawing is a combination of the en face side view (right) and a 45 degrees oblique view (left) which shows the wings at maximum extent:

20170916_103334.thumb.jpg.6b8fa840ce0f180319d32f2da3fdc40b.jpg

I did not want to have to carve off the unwanted corners and all that wood from the bottom half with a carbide scrapper so I made partial depth cuts with the SCM saw:

20170903_205118.thumb.jpg.d5d0c7e420f8946cf8bd4b5086625b3d.jpg20170903_205730.thumb.jpg.a2d76d8f4c2b39602e4a2acee540562f.jpg

Follow up partial depth cuts at 22.5 degrees:

20170903_211647.thumb.jpg.8a6960417b87d4bb3edcd6da7c55aa81.jpg

20170903_213220.thumb.jpg.0fd64ba454790ea1da848eb2075ea3a7.jpg

Rounded, then shaped the bowl and wings:

20170904_110203.thumb.jpg.fe387a37fcff5860dabc8a3d0072aa4f.jpg20170904_132111.thumb.jpg.efd6efa322ed9e385b68095ef7503cef.jpg

The surface smoothed after a great deal of sanding, which was very tedious.  Then the boring part:

20170905_202800_Burst01.thumb.jpg.d12a8809e58c798baf4db4e30d67d704.jpg20170906_210026_Burst01.thumb.jpg.ce8d8476f9fe8d7f0d325d179a8947a4.jpg

Remount and shape the inside.  Then finally, with teeth clenched and fingers crossed, shape the wings:  

20170908_204406.thumb.jpg.b88dff2a30fb6f32bdce02d36a6f6207.jpg

All good.  Sanding redux.  Finished bowl:  

20170913_145602_Burst01.thumb.jpg.97e5df0c83888fdf9bef4b1fb20abe23.jpg

I choose an ambrosia blank for this bowl because it was the right size and I thought ambrosia desirable.  But I have to be honest I do not like the look of this wood.  So in the future I won't be competing with ambrosia lovers for the limited stock available.

Otherwise I am quite happy with the bowl.  

I expected at least one of the wings to break off during the turning.  I did loose a few small chips from the wing tips (and smacked the crap out of my fingers more than a couple of times), so the droop is not as dramatic as I intended, but, on the whole not noticable after final sanding.  The surface coat is bees wax in mineral spirits.  

 

I like it, and it seems you did good. Interesting piece.  And I can see how and why you got your fingers smacked.

Cool looking piece!  Those spinning corners on the lathe would definitely get my pucker factor up!  Nice job!

  • Author

Well, thanks very much for the comments and compliments.

I will tell you that I had no "inadvertent communication" of the turning chisels with the wings.  The tips are fragile and your gonna have some loss there, but I never got wacked. 

Where I did get wacked was trying to sand up close to and into the wings.  What I finally realized was:

1.  Do the wings with the machine off, and just sand them by hand.  The sanding result was much better (with the wings spinning the sanding was predominately on the leading edge and skipping the rest of the wing), and with the motor off you don't get wacked.  

2.  When sanding the body of the bowl, keep the speed low so that when you do go close to the wings you are in better control if you do get wacked it's much more gentle.  Cutting the wings calls for high speed, but not the sanding.  

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.