Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Finishing Bubinga veneer

Featured Replies

I'm having problems filling the seams between strips of bubinga veneer on 30" x 60" coffee table.  The veneer is laid on a 1 1/2 substrate of baltic birch ply.  I sliced the veneer to between 1/8 and 3/32 and ran it through a drum sander to remove saw marks and even the thickness of each piece.  I laid out the sequence of strips and ran a strip of heavy clear packing tape along each seam.  I've done this many times before with no problems.  Glue was rolled on bottom of the taped up panel which was then transferred to the substrate, covered with a plastic sheeting and a plywood caul and placed in the bag. The problem began a few days after the veneered piece was taken from the vacuum bag.  At first all was fine.  A few days later gaps (about 1/32) formed between each strip of veneer.  My solution was to fill all of the seams with Timbermate (a grain filler/wood putty) which I've also used on bubinga before.  They have a color which is a great match to the bubinga.  Again the panel looked great.  Off to the finisher who sprayed on a catalyzed finish.  When I picked up the panel the gaps had returned.  It made the panel look as of it was intended to be viewed as "rustic".  Not what the client was expecting.  I removed the finish (scraped and sanded), tried to refill the gaps with more Timbermate, brushed on shellac to see what it looked like.  Still gaps but not quite as bad. More like indents than gaps but still readily noticed.  Now the gaps look like pores (like oak but longer) which I can't seem to fill  Seems like surface tension prevents penetration.  My client isn't happy.  I'm not happy.  At this point my only solution seems to be removing the existing veneer and starting over.  But I'm hesitant because I don't know what happened and I do not want a repeat of the problems.  Notes:  The veneer had been around plenty long enough to be acclimated,  we had been going through a triple digit heatwave, maybe I could have edge glued the strips of veneer but this method hasn't failed me until now,  the Timbermate is hard and isn't supposed to shrink but by now I should have filled the gaps, maybe the filler sands away faster than the surrounding wood keeping the gaps fully filled while sanding.

Any fresh eyes out there with suggestions on how to fix/fill my gaps and how to prevent this from happening again???

DSCN0860.JPG

DSCN0856.JPG

DSCN0857.JPG

Boy, that's got me stumped, so I'm no help, but welcome to the forum. Sure hope someone can figure this out. What kind of glue was used?

  • Author

Thank you.  I used regular Titebond.  For flat surfaces this has served me well.  For curved applications I use a two part resin glue.

Im wondering if the Timbermate is not playing nice with the topcoat? Was it a conversion varnish? You may want to reach out to Timbermate and find out? 

 

-Ace-

1 hour ago, AceHoleInOne said:

Im wondering if the Timbermate is not playing nice with the topcoat? Was it a conversion varnish? You may want to reach out to Timbermate and find out? 

 

-Ace-

Yes: Did the edged mate before the topcoat was applied?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.