collinb Posted November 3, 2017 Report Posted November 3, 2017 Am wondering if any here use manual-feeding drum sander solutions. I would guess those would all be home-brew units. How well do they work for you? Quote
Marmotjr Posted November 4, 2017 Report Posted November 4, 2017 Well, I do have to plan what I have "down range" from the sander, as it will launch the piece I'm working on if I let go. I routinely take the tops off my fingernails with it, but it also does wonders for getting glue off the skin. Because I'm leaning over the stupid thing, I have to sometimes wear a mask even with the DC running. Since I turned the drum myself, it's about 1/32 off from one end to another. So my last pass through, I run the piece twice to get it perfectly even. All that aside, It works great for me. A single screw in the back underneath adjusts the height, and it's very reliable and repeatable. I just have to occupy my lathe while I use it.... Quote
Dave H Posted November 4, 2017 Report Posted November 4, 2017 I made a lathe powered thickness sander modeled after a thickness sander that was on the woodgears web site. That sander used an electric motor, I used my lathe as a power I used this set up for several years It worked well for a manual feed unit It gave very consistent results, I needed to do some table tops so I bought a jet 16-32 now the lathe powered thickness sander was dismantled here's a video of it in use a day after it was finished I started using the next piece to advance the first piece through the sanding cycle. Quote
Marmotjr Posted November 4, 2017 Report Posted November 4, 2017 Also, I believe Stumpy Nubs has a shop built two stage DS on his site, possibly for sale if not free. It's an impressive machine. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.