Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Ribbon Holder Deal

Featured Replies

  • Popular Post

Lisa loves to do fancy wrapping of presents.  As a result she has many rolls of ribbon and they have been stored in a couple of drawers in the guest room.  I thought that was inefficient as she had to dig to find what she wanted and make numerous trips to that room if she decides another choice is warranted.

 

Thus, I designed this thing.  Walnut sides finished with two coats of Amber Shellac and two coats of Arm-R-Seal.  Maple dowel (5/8") to hold the rolls.   Small Walnut dowel (3/8") pin to hold the side in place, fits into holes drilled into the Maple dowel.  Leather contact-cemented onto the bottoms. I pondered how to get the hole for the pin through the side into the center hole for a day or two as I made a jig to hold it upright but it wouldn't fit in my small drill press.  In the middle of the night (True story) it came to me and I used a doweling jig to hold the handheld drill straight.  I was scared to freehand it for 4 inches and have it be straight. 

 

Worked great!  Now it can be carried to where she is working and she will have all of her ribbon handy.  Also, it is designed to be set upright in the corner of a room to be stored out of the way.

 

Once that bit of engineering was figured I glued the big dowel into the left side piece.  I used the other side with the long dowel running through and the little dowel pin in it to keep it straight and have the holes in the dowel aligned properly with where they needed to meet the hole for the pin.  Hide glue game me the time i needed to get it into alignment.

 

Lisa likes it.  The pictures don't do the Walnut justice.  This is a spectacular board I have been holding onto for just the right project.  Still have a 4/4 X 3" X 8" piece left.

23472119_2135049803175567_4660845867581885881_n.jpg

23517615_2131903840156830_6253114546095219058_n.jpg

side-1.jpg

side2.jpg

side3.jpg

side4.jpg

side5.jpg

side6.jpg

side7.jpg

side8.jpg

You say she likes it but I'm thinking she loves it. Nice thing to do for the wife.  Great Idea that looks and works great Klappco.

A special piece of walnut for that special gal. Neat idea! I hope you don’t have an indoor cat;)

Love it!

 

BTW, I showed my wife and her reply was "yes please" so I just I'll be making one too. Great idea and beautiful execution. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.