Recommended Posts

Posted

I just wanted to drop a introduction out there.

I've been woodworking off and on since High School but didn't have a shop or room to do anything for a lot of the time so I have been pretty limited in what I can do. Watched everything out there (I really miss watching David Marks on TV :( ) and read most of the magazines (hate what they did to workbench magazine though, not renewing that one)

About 6 years ago my wife and I bought a house so of course that brought on all the obligatory stuff on the honey do list so it was a good excuse to start collecting tools :)

I still don't have a lot of room but I have broken my shop in two to give me a little more space. Currently I have a 9 x 9 space in my basement where I have my workbench along with my drill press and hand made router table along with storage of various power and hand tools. I have a one car garage that I keep my two motorcycles in that holds my contractor saw, 14" bandsaw, 6" jointer and portable planer as well as having some wood storage.

I am just getting around to trying to put everything in order though so it's not as functional as I would like it to be and in small spaces like that, it's a killer some days. Usually when I have to cut full sized sheet goods or rip pieces over 3 feet or so, I have to setup in my driveway which means winter is tough (this winter has been particularly rough with early snow and lots of it so far)

I'd say I am probably an advanced beginner/early intermediate as far as skill level just because I haven't had a lot of time to actually make things other then jigs, household stuff and some gifts (wall mount candle holders, boxes, etc)

My current household project (and the biggest thing I've ever undertaken) is building kitchen cabinets. I've been working on them for a year or so now and they are moving along pretty well as time, money and weather permit. The basic design is from Wood magazine from a few years back with some of my own tweaks like a full pantry.

Anyway, just wanted to say Hi.

Hope to chat with you all soon.

-Jim

Posted

If you ever find yourself up north and would like to play in my little basement shop, you're welcome.

It's pretty well equipped and can give an idea of what can be packed into small spaces <vbg>

Mostly I'm into woodturning these days, but I have plenty of other toys to fiddle with.

Hi Alan,

I'm in Woodbridge, about 40 minutes south of you...

-Jim

Posted

Bikes and tools, sounds like a good way to spend time to me :)

Thanks for the invite.

We'll see if the groundhog works with us in the next couple of weeks.

Maybe we will be having a fast, snowy winter instead of a long cold one? We can always hope...

-Jim

Posted

I just wanted to drop a introduction out there.

I've been woodworking off and on since High School but didn't have a shop or room to do anything for a lot of the time so I have been pretty limited in what I can do. Watched everything out there (I really miss watching David Marks on TV :( ) and read most of the magazines (hate what they did to workbench magazine though, not renewing that one)

About 6 years ago my wife and I bought a house so of course that brought on all the obligatory stuff on the honey do list so it was a good excuse to start collecting tools :)

I still don't have a lot of room but I have broken my shop in two to give me a little more space. Currently I have a 9 x 9 space in my basement where I have my workbench along with my drill press and hand made router table along with storage of various power and hand tools. I have a one car garage that I keep my two motorcycles in that holds my contractor saw, 14" bandsaw, 6" jointer and portable planer as well as having some wood storage.

I am just getting around to trying to put everything in order though so it's not as functional as I would like it to be and in small spaces like that, it's a killer some days. Usually when I have to cut full sized sheet goods or rip pieces over 3 feet or so, I have to setup in my driveway which means winter is tough (this winter has been particularly rough with early snow and lots of it so far)

I'd say I am probably an advanced beginner/early intermediate as far as skill level just because I haven't had a lot of time to actually make things other then jigs, household stuff and some gifts (wall mount candle holders, boxes, etc)

My current household project (and the biggest thing I've ever undertaken) is building kitchen cabinets. I've been working on them for a year or so now and they are moving along pretty well as time, money and weather permit. The basic design is from Wood magazine from a few years back with some of my own tweaks like a full pantry.

Anyway, just wanted to say Hi.

Hope to chat with you all soon.

-Jim

Hey Jim!

Welcome to TWW Forums - You'd be amazed at how much can get done in a small shop - Like yourself, my first kitchen was built out of a closet - Actually, a closet would be bigger than my first shop.... But that's a whole different topic!

Welcome!

Posted

Hey Jim!

Welcome to TWW Forums - You'd be amazed at how much can get done in a small shop - Like yourself, my first kitchen was built out of a closet - Actually, a closet would be bigger than my first shop.... But that's a whole different topic!

Welcome!

Thanks for the welcome Gregory.

I know the area around Knoxville/Asheville/Great Smokey Mountain National Park fairly well. We vacation in that area every few years. I'm trying to convince my wife that we need to rent a cabin down there again this year because we haven't been down for the last two years but I think she has other plans in mind, we'll see...

-Jim

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.