Popular Post MisterDrow Posted November 30, 2017 Popular Post Report Posted November 30, 2017 Decided to try to make some wooden rings this year for Christmas gifts. I don't own a lathe so I bought a drum sanding kit for my drill press and just use the sanding barrel to hold the piece on my drill while I smooth it out with some sand paper a little bit at a time. I glued these layers up with the wood grain up perpendicular on each layer to hopefully improve strength, cut them as close as I could get with my scroll saw, and then sanded away on my makeshift drill press lathe until it was even, smooth, and the right size. I then finished up the inner part of it with my dremel and some patience and applied a couple coats of oil finish. This was the first result and I was extremely happy with the outcome. This is sapele and yellowheart. I also have maple and purple heart so I'll get more glued up and make another 7-8 of these to give as gifts. Not counting glue drying time, this took about 30-ish minutes to cut, shape, and apply finish. 8 Quote
wtnhighlander Posted December 1, 2017 Report Posted December 1, 2017 Nice job! The alternating plies is a good idea for increasing strength. Another idea I've seen is to make an inner layer by wrapping a long thin shaving several times around a mandrel and saturating it with CA glue. 2 Quote
kyokahn Posted December 1, 2017 Report Posted December 1, 2017 20 hours ago, wtnhighlander said: Another idea I've seen is to make an inner layer by wrapping a long thin shaving several times around a mandrel and saturating it with CA glue. AKA bentwood rings. I've made a few of those, definitely takes a bit more practice to wrap your mind around the process (pun shamelessly intended) and prevent gaps, but they're nearly indestructible. A couple of them have been worn daily for about a year and barely a scratch. The good thing about them is you can use any leftover veneer to make them, or use your hand plane shavings. 1 Quote
Coop Posted December 2, 2017 Report Posted December 2, 2017 23 hours ago, wtnhighlander said: Another idea I've seen is to make an inner layer by wrapping a long thin shaving several times around a mandrel and saturating it with CA glue. Ross, my imagination is at at stand still. Do you have pics or links to help me figure this one out? Really cool Mr. Drow. Quote
wtnhighlander Posted December 2, 2017 Report Posted December 2, 2017 This guy uses the technique to create the inner portion of his rings. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.