Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Barnwood table maintenance and repair

Featured Replies

Hi there,

I'm looking for help.  We have (what was) a beautiful reclaimed barnwood table n our dining room that we purchased alost 20 years ago.  Over the years, and with kids in the house, my maintenance of it has been fair, but it is seeing some wear and tear.  Specifically... lots of little scratches and one unfortunate rectangular stain from a poorly placed hot plate, both of which can be seen in the attached photo. 

Can someone recommend the best course of action to make these less visible?  More tung oil?  Sanding and then oil?  I've seen some recommendations of coconut oil as a cure all, but I am skeptical. 

Note: I've used Briwax in the past (but not for some time), but I can remember a foul smell, and I won't have much ventilation since it's winter (and I don't really want to wait until Spring). 

Thank you very much for any thoughts.

 

IMG_1985.thumb.jpg.252c1039d477e0ea4120d7da3638170f.jpg  

Depends on how much of the 'reclaimed' look you want to keep. A simple cleaning might be all that is needed.

If you really want to freshen the appearance and remove those marks, I'd say a good sanding is in order. If you must work in the house, investing in a card scraper can make the removal of old finish less messy. 

My suggestion would be to scrape the surface clean, then apply a wipe-on polyurathane varnish, like General Finishes Arm-R-Seal or Minwax Wipe-On Poly. These will restore the deep, rich wood color. However, they do off-gas and smell somewhat objectionable. If that is a problem, water-bourne polyurathanes such, as Minwax Polycrylic, have far less smell and dry quickly, but are very clear, and won't impart that warm tone to the wood. One other option is to use shellac, as it dries quickly, the smell doesn't bother most people, and it is available in various shades that can influence the color tone. It will also adhere to mast anything, so can be used over other (unknown) finishes. But shellac isn't quite as durable as poly.

If you really want to get rid of that hot plate scorch a card scraper is the tool to use. You will need to learn how to sharpen one. It will handle the scratches as well. Then you will have to apply a new finish with the odors and drying times.

If you just want to do a touch up Howard's Restor-a-finish comes in colors and you might be able to slightly darken the area around the scorch and blend it in. Old English furniture polish or something similar would be the fast & easy route.

I really don’t see the problem. Had those been there as barn wood, you would have called them points of interest. I agree with @wtnhighlander if you just want to clean it up. If you want to get back to bare wood, I agree with both of the above on the card scraper. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.