Popular Post pkinneb Posted July 14, 2018 Popular Post Report Share Posted July 14, 2018 I have had my Hammer A3/31 for about 12 years or so and from the day I got it it has worked flawlessly, no snipe ever. So about a month ago I started getting some snipe especially on the right side of the bed. So today I was determined to figure out if I could fix it. Well I started looking at the blades (Tersa straight knives) and I noticed on one of the three blades the right side appeared higher, then it dawned on me the last time I changed blades I loosened the wrong allen nuts. This got me thinking what are those used for well sure enough they raise the blade holder and one was probably a 1/32nd higher so I got out my caliper and adjusted it back in line with the others and guess what, no more snipe. Glad it was operator error and an easy fix 3 1 Quote Link to comment Share on other sites More sharing options...
Chet Posted July 15, 2018 Report Share Posted July 15, 2018 It always feels good to get something figured out a repair, even when it was self inflicted. 2 Quote Link to comment Share on other sites More sharing options...
pkinneb Posted July 15, 2018 Author Report Share Posted July 15, 2018 10 hours ago, Chet said: It always feels good to get something figured out a repair, even when it was self inflicted. So true. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.